Fûts et manutention de fûts

Taille : 3/4", Matériau : Polyéthylène | Utilisez une taille de 5,1 cm pour les liquides épais et visqueux ou un débit volumique plus important de...

| Convient à 45 imp. gal./55 gal US. tambours Finition non peinte Pas de joints ou de raccords inclus Numéro de pièce du fabricant : NDHDS0350 ...

Welded 3/16" thick x 4", frames are built to withstand constant use 24" inside diameter handles 45 imp. gal./55 US gal. drums Comes with four swiv...

Welded 3/16" thick x 4", frames are built to withstand constant use 24" inside diameter handles 45 imp. gal./55 US gal. drums Comes with four swiv...

WARNING! Before ordering any faucet, establishing compatibility with the MSDS of the fluid used in application is a must! Standard 3/4" tapered pi...

WARNING! Before ordering any faucet, establishing compatibility with the MSDS of the fluid used in application is a must! For non-flammable liquid...

Horizontally lifts 45 imp. gal./55 US gal. steel drums, 34"-36" long Alloy steel lifting ring, steel rods, malleable iron hooks Drum Capacity: 55...

For use with most dispensing and transferring non-corrosive and petroleum based fluids Cushioned vinyl grip handle Discharge spout can be rotated ...

For use with certain water-based solvents, strongest acids or alkaline solutions Adapts to 1-1/2" or 2" bung adaptor for 5 to 55-gallon drums WARN...

For use with most water-based solvents, strong acids or alkalis and light viscosity petroleum liquids Adapts to 1-1/2" or 2" bung adaptor for 5 to...

Polyethylene dolly will not dent, corrode, or rust Handles 30 imp. gal./37 US gal.& 45 imp. gal./55 US gal. drums Solid bottom construction wi...

Polyethylene dolly will not dent, corrode, or rust Handles 30 imp. gal./37 US gal.& 45 imp. gal./55 US gal. drums Solid bottom construction wi...

Polyethylene dolly will not dent, corrode, or rust Handles 30 imp. Gal./37 US gal.& 45 imp. Gal./55 US gal. drums Solid bottom construction wi...

Offset handle Fits almost any metal or plastic, male or female bung nuts or plugs 13" overall length Material: Manganese Bronze Alloy Weight: 4 ...

Offset handle 13" overall length Fits almost any metal or plastic, male or female bung nuts or plugs Material: Annealed Ductile Iron Weight: 4 l...

Safe method of upending drums for moving, draining or storing No lifting, straining, or danger of drum tipping backwards Load drum into the draini...

Made of FDA compliant materials Formed lip grips chime of drum and stays in place during follower plate pumping Smooth wall inserts withstand mixi...

Eliminates the risk of spills during transport with its 57-gallon sump capacity Caster wheels let you move around freely, while its ergonomically ...

Steel drum rack has four-way fork truck access for ideal operation Do not stack more than four racks high for safety and maximum efficiency Featur...

Cylindrical film liners are heat-sealed and made FDA compliant materials Available in anti-static for solvent-based applications Available in 40" ...

Available in 40" height to fold over drum or 53" height to tie off Cylindrical film liners are heat-sealed and made FDA compliant materials Availa...

Available in 40" height to fold over drum or 53" height to tie off Available in anti-static for solvent-based applications Cylindrical film liners...

Cylindrical film liners are heat-sealed and made FDA compliant materials Available in anti-static for solvent-based applications Available in 40" ...

Available in 40" height to fold over drum or 53" height to tie off Cylindrical film liners are heat-sealed and made FDA compliant materials Availa...

Available in anti-static for solvent-based applications Cylindrical film liners are heat-sealed and made FDA compliant materials Available in 40" ...

Cylindrical film liners are heat-sealed and made FDA compliant materials Available in anti-static for solvent-based applications Available in 40" ...

Remove material nearly as fast as regular flap wheels while leaving a finer finish thanks to the non-woven material between each sanding flap Exce...

Dual-action siphon-lift pump Easily transfers fuel from one vehicle or container to another without danger of inhaling liquid Siphons downhill if ...

Has an automatic mechanical operation Great for positioning, drums in and out of overpacks Steel construction with spring loaded arms for safety D...

Ideal for safe storage, handling and transportation of various materials, spill containment and clean-up, waste disposal and incineration Reduce w...

Accurate pouring from any height Rotation of drum is controlled by 6' chain loop Optional MORStop ™ tilt brake holds drum tilt position constant e...

Manufacturer Part Number: 07M445 Arbor Hole Size: 5/8"-11 Grit: S-Fine Width: 4" Diameter: 4-1/2"

Polish, burnish, blend, deburr, clean and brighten in stainless steel, aluminum, brass, copper and other alloys Will give uniform and consistent f...

Manufacturer Part Number: 07K442 Arbor Hole Size: 5/8"-11 Width: 4-1/2" Grit: 80 Diameter: 4-1/2"

| Numéro de pièce du fabricant : 4GT `Numéro de pièce du fabricant : 4GT

| Numéro de pièce du fabricant : 0132-301 `Numéro de pièce du fabricant : 0132-301

55 gallons américains. (45 gallons impériaux), matériau : acier entièrement soudé, matériau : polyoléfine, 40", 1000 lb/454 kg | Méthode sûre de r...

Matériau : acier moulé au zinc, 7-1/2", 1-1/2" | Peut être utilisé pour ouvrir et fermer les bondes et les bouchons de tambour, ainsi que comme cl...

| Double tête - 2,5 livres. Convient également à d'autres types de fermetures Tête à douille qui s'adapte sur des fiches de 3/4" et des broches ...

Matériau : nylon anti-étincelles, 8", 1-1/4" | Peut être utilisé pour ouvrir et fermer les bondes et les bouchons de tambour, ainsi que comme clé ...

| Réglable pour manipuler des tambours de 31" à 39" de haut Peut être ajouté à la plupart de nos équipements de levage de fûts Morse Ajoutez cet...

| Numéro de pièce du fabricant : 14-P `Numéro de pièce du fabricant : 14-P

55 gallons américains. (45,8 gallons impériaux), type : acier, 1, 1 500 lb | Comprend une conception pliante à charnière pour le stockage Disposi...

55 gallons américains. (45 gallons impériaux), matériau : acier, 800 lb/363 kg | Versement précis à partir de n'importe quelle hauteur Gère les t...

| Conçu pour tester les systèmes de vidange, de ventilation et d'évacuation à une contre-pression de 17 PSI Écrou à oreilles en zinc extra large ...

Taille : 3/4", Matériau : Acier inoxydable | Homologué FM Pare-flammes interne Approuvé pour une utilisation avec des huiles, des produits infl...

Taille : 30 gal US (25 gal imp.), non doublé, couleur : beige, dessus ouvert, Y115, matériau : plastique | Fournit une isolation thermique et prot...

Taille : 14 gal US (11,7 gal imp.), non doublé, couleur : bleu, dessus ouvert, 1H2/X100/S, type : verrou à levier en plastique, verrou à levier en ...