Loctite

Format: 50 ml. Container Type: Dual Cartridge Colour: Clear Type: Two-Part Manufacturer Part Number: 233962

Format: 400 ml. Container Type: Dual Cartridge Colour: Off-White Type: Two-Part Manufacturer Part Number: 237109

Goes on white and converts rust to a durable, black, metal-protective coating in 10 minutes Wire brush parts and apply with brush or spray Surface...

Goes on white and converts rust to a durable, black, metal-protective coating in 10 minutes Wire brush parts and apply with brush or spray Surface...

A self-leveling aluminum liquid that can be poured into molds and cavities Recommended for casting aluminum replacement parts and for making molds...

Two-part super fast bonding adhesive Excellent for bonding metals, ceramics, wood, concrete, and glass under typical dry temperatures Gel consiste...

Aggregate-filled, epoxy system for pours up to 6" deep For self-levelling applications under rails and sole plates Bonds to steel, concrete and it...

Excellent chemical resistance Fills porosities and can be used to build up worn parts For bonding glass, hard plastics, rubber and metal 180°F tem...

Excellent chemical resistance Fills porosities and can be used to build up worn parts For bonding glass, hard plastics, rubber and metal 180°F tem...

Bonds virtually any material to repair, fill and seal holes, cracks and worn surfaces 300°F temperature resistance 2300 psi adhesive tensile shear...

Trowelable For repairing and resurfacing cracks in concrete floors Bonds to old and new concrete and provides greater strength and chemical resist...

Trowelable For repairing and resurfacing cracks in concrete floors Bonds to old and new concrete and provides greater strength and chemical resist...

Two-component, rapid setting concrete repair and grouting system Chemically resistant to most common liquids and chemicals For concrete, wood, gla...

Two-component, rapid setting concrete repair and grouting system Chemically resistant to most common liquids and chemicals For concrete, wood, gla...

Rapid setting concrete repair and grouting system Bonds to concrete, wood, glass, steel and construction materials CFIA approved Two-component sys...

Pail A two-component, rapid-setting concrete repair and grouting system with same properties as the Magna-Crete ™ but containing smaller aggregate...

Steel filled Pourable and self-levelling Recommended for casting into hard to reach areas, anchoring and levelling and forming molds and fixtures ...

Non-rusting, ferro-silicone-filled epoxy Extremely high compressive strength and wear resistance Ideal for rebuilding worn surfaces exposed to har...

Two-component, room temperature curing epoxy adhesive used for high strength, permanent bonding of metals, ceramics, concrete, wood and most plast...

Faster setting version of the Loctite ™ Fixmaster ™ steel putty Sets in 3 minutes Accepted for use in Canadian food processing facilities Format:...

150 g., Type: Stick| Kneadable, two-part paste Working time: 3 minutes Sets in 10 minutes Adheres to damp surfaces Can be drilled, filed and painte...

Kneadable, two-part paste Working time: 3 minutes Sets in 10 minutes Adheres to damp surfaces Can be drilled, filed and painted Ideal for emergenc...

Forms a non-rusting, very hard, durable finish on damaged stainless steel surfaces 0.25 ft.2 coverage, at 1/4" thickness 225°F maximum operating t...

Steel filled, non-sagging, two-part epoxy that cures to a metal-like finish for rebuilding or repairing metal parts 0.3 ft.2 coverage, at 1/4" thi...

Temperature range to 400°F with excellent solvent and chemical resistance For hand dispensing or screen printing Resists low on-line test pressure...

Flexible gaskets for rigid machined flanges with less than 0.050" gap Flexes with flanges that move in service For flexible applications 0.010" un...

Flange Sealant seals close fitting joints between rigid metal faces and flanges Because it is fast curing, it provides resistance to low pressures...

Used for bonding and sealing dissimilar substrates High viscosity, sag resistant one component adhesive/sealant based on silane Modified polymer, ...

Used for bonding and sealing dissimilar substrates High viscosity, sag resistant one component adhesive/sealant based on silane Modified polymer, ...

Used for bonding and sealing dissimilar substrates High viscosity, sag resistant one component adhesive/sealant based on silane Modified polymer, ...

Can Prevents seizure, galling and friction in stainless steel and other metal parts up to 750°F (399°C) Accepted for use in Canadian food processi...

Can No-chlorinated solvents Format: 10.5 oz. Container Type: Aerosol Can Manufacturer Part Number: 548993 Colour: Clear

Sets quickly to a hard set Recommended for rigid, permanent assemblies Resistant to gasoline and other solvents Oil resistant Non-corrosive Sealin...

Sets more slowly to a pliable film Recommended for non-rigid, vibrating assemblies Resistant to gasoline and other solvents Oil resistant Non-corr...

Sets more slowly to a pliable film Recommended for non-rigid, vibrating assemblies Resistant to gasoline and other solvents Oil resistant Non-corr...

Outstanding lubrication to all metals including stainless steel, aluminum and soft metals Metal-free Excellent lubricate Brush top applicator Easy...

Can Metal-free Excellent lubricate Outstanding lubrication to all metals including stainless steel, aluminum and soft metals up to 2400°F (1315°C)...

Can Metal-free Excellent lubricate Outstanding lubrication to all metals including stainless steel, aluminum and soft metals up to 2400°F (1315°C)...

Can Holds gaskets in place during assembly Seals and bonds rubber, cork, paper, felt, metal and asbestos gaskets Contains no ozone depleting compo...

Can Holds gaskets in place during assembly Seals and bonds rubber, cork, paper, felt, metal and asbestos gaskets Contains no ozone depleting compo...

Can Metal-free formulation Provides high levels of purity and excellent lubricating properties Format: 2 lbs. Container Type: Brush Top Can Max...

Format: Stick Manufacturer Part Number: 416035

Ideal for use on many materials such as metal, plastic, rubber, wood, paper, and leather Provides fast fixture time even at low temperatures Ready...

Excellent bond strength on many substrates Provides good elasticity for parts subject to relative movement Excellent resistance to shock loading ...

Ideal for use on variety of substrates including most plastics and rubbers Fast fixture time helps reduce production time and work-in-process Non-...

Ideal for use on variety of substrates including most plastics and rubbers Fast fixture time helps reduce production time and work-in-process Non-...

Delivers great performance with a shear strength of 2980 psi Format: 2.8 oz. Container Type: Bottle Colour: Clear Application Time: 5 min. Fu...

Bonds, seals and repairs a wide variety of materials For metals, most plastics and wood Gap filling for high temperatures 20 minutes work life 2.5...