Skip to content

  • Aluminum File

  • Anti-Vibration Hammer

  • Ball Pein Hammer

  • Band File

  • Brick Hammer

  • Carpenter Claw Hammer

  • Chain Saw File

  • Chipping Hammer

  • Chisel Set

  • Club Hammer

  • Cold Chisel

  • Cordless Hammer Driver

  • Cordless Rotary Hammer

  • Cordless Screwdriver

  • Crimping Pliers

  • Cross Point Screwdriver

  • Dead Blow Hammer

  • Demolition Claw Hammer

  • Desktop File/Tray

  • Diagonal Cutting Pliers

  • End Cutting Pliers

  • Farmer's File

  • Fence Pliers

  • File Card With Brush

  • File Cart

  • File Folders

  • File Handle

  • File Set

  • File Storage Drawer

  • Flat File

  • Groove Joint Pliers

  • Half Round File

  • Hammer Drill

  • Hammer Handle

  • Hammer Set

  • Hammer Stapler

  • Hammer Tip

  • Hand File

  • Handy File

  • Hex Point Screwdriver

  • Hex Shank Rotary Hammer

  • Hose Pinch-Off Pliers

  • Insulated Pliers

  • Insulated Screwdriver

  • Jeweller's Screwdriver

  • Knife File

  • Lathe File

  • Linesman Pliers

  • Locking Pliers

  • Long Nose Pliers

  • Low Profile Pallet Truck

  • Low Profile Shop Cart

  • Masonry Chisel

  • Mill File

  • Multi Purpose Pliers

  • Multibit Screwdriver

  • Needle Nose Pliers

  • Nutsetter & Screwdriver Bit Sets

  • Phillips Screwdrivers

  • Plan File Parts & Accessories

  • Plan File Storage

  • Plier Ground Clamp

  • Plier Parts & Accessories

  • Plier Set

  • Plier Stapler

  • Pneumatic Band File

  • Pneumatic Screwdriver

  • Pneumatic Utility Hammer

  • Posidriv® Screwdriver

  • Power Chisel

  • Punch & Chisel Set

  • Retaining Ring Pliers

  • Roll File Storage

  • Round File

  • Scaling Chisel

  • Screwdriver Bit Sockets

  • Screwdriver Insert Bit

  • Screwdriver Power Bit

  • Screwdriver Set

  • SDS-Plus Rotary Hammer

  • Seaming Pliers

  • Side Cut Rebar Pliers

  • Sledge Hammer

  • Slip Joint Pliers

  • Slot Cabinet Tip Screwdrivers

  • Slot Keystone Screwdrivers

  • Soft Face Hammer

  • Specialty Pliers

  • Specialty Screwdriver

  • Square Drive Screwdriver

  • Square File

  • Tamper Proof Screwdriver

  • Taper File

  • Thread Restoring File

  • Three Square File

  • Torque Screwdriver

  • Torx® Screwdriver

  • Wall File Holder

  • Warding File

  • Wedge For Hammer Handle

  • Welding Pliers

  • Wire Stripping Pliers

  • Woodworking Hand Chisel

    • Hand Tools

    Filters

    Long Angle Lathe Files - Fine

    Long Angle Lathe File - Fine, Flat, 10"

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $25.40
    $25.40 - $25.40
    $25.40

    Specially designed for finishing rapid stock removal on lathe work Rectangular shape Safe edges Cut faster than regular mill files and leave smoot...

    View full details
    Long Angle Lathe Files - Fine

    Long Angle Lathe File - Fine, Flat, 8"

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $19.30
    $19.30 - $19.30
    $19.30

    Specially designed for finishing rapid stock removal on lathe work Rectangular shape Safe edges Cut faster than regular mill files and leave smoot...

    View full details
    Aluminum Files - Type "A" Flat

    Aluminum Files - Type "A" Flat, Flat, 12", Double

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $33.60
    $33.60 - $33.60
    $33.60

    Special tooth construction eliminates clogging when filing aluminum Flat shape Double-cut All sizes have same number of teeth per inch Smooth fini...

    View full details
    Aluminum Files - Type "A" Flat

    Aluminum Files - Type "A" Flat, Flat, 8", Double

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $20.30
    $20.30 - $20.30
    $20.30

    Special tooth construction eliminates clogging when filing aluminum Flat shape Double-cut All sizes have same number of teeth per inch Smooth fini...

    View full details
    Electric Dynafile® II Abrasive Belt Machines
    SPECIAL ORDER

    Electric Dynafile® II Abrasive Belt Machines

    DYNABRADE
    $0.00 - $0.00
    $0.00
    $849.00
    $849.00 - $849.00
    $849.00

    Runs coated-abrasive and non-woven nylon belts Ideal for grinding, deburring, blending, finishing and surface conditioning Tool includes model THZ...

    View full details
    Square Files

    Square File, Square, 6", Smooth

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $15.80
    $15.80 - $15.80
    $15.80

    Used on slots, keyways and general surface filing Square shape Double-cut Tapered slightly towards point Larger sizes frequently preferred to corr...

    View full details
    Square Files

    Square File, Square, 10", Bastard

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $21.30
    $21.30 - $21.30
    $21.30

    Used on slots, keyways and general surface filing Square shape Double-cut Tapered slightly towards point Larger sizes frequently preferred to corr...

    View full details
    Square Files

    Square File, Square, 6", Bastard

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $13.80
    $13.80 - $13.80
    $13.80

    Used on slots, keyways and general surface filing Square shape Double-cut Tapered slightly towards point Larger sizes frequently preferred to corr...

    View full details
    Square Files

    Square File, Square, 4", Bastard

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $13.20
    $13.20 - $13.20
    $13.20

    Used on slots, keyways and general surface filing Square shape Double-cut Tapered slightly towards point Larger sizes frequently preferred to corr...

    View full details
    Belt Sander
    Belt Sander
    Multiple options

    Belt Sander

    Aurora Tools
    $0.00 - $292.00
    $0.00
    $225.00 - $292.00
    $225.00 - $292.00
    $225.00

    Low-noise Forward-reverse switch Easy belt changes Air Consumption: 16 CFM Air Inlet: 1/4" NPTF Sound Level (dBA): 85 No Load RPM: 16500 Powe...

    View full details
    Electric Dynafile® II Abrasive Belt Machines
    SPECIAL ORDER

    Electric Dynafile® II Abrasive Belt Machines, 1/8" - 3/4"

    DYNABRADE
    $0.00 - $0.00
    $0.00
    $1,223.00
    $1,223.00 - $1,223.00
    $1,223.00

    ELECTRIC DYNAFILE® II VERSATILITY KITS Includes model TGY744 electric Dynafile® II with model THZ341 contact arm and two additional arms models TH...

    View full details
    Dynafile® II Abrasive Belt Machines

    Dynafile® II Abrasive Belt Machines, 1/4" - 3/4" x 20 1/2", 28 CFM, 1/4" NPT

    DYNABRADE
    $0.00 - $0.00
    $0.00
    $1,511.00
    $1,511.00 - $1,511.00
    $1,511.00

    Grind, deburr, blend and polish, on metal, plastic, fiberglass, composites, rubber, glass and more Grind from contact wheel or platen pad; finish ...

    View full details
    Mill Files

    Mill File, Flat, 10", Smooth

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $16.80
    $16.80 - $16.80
    $16.80

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 8", Smooth

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $14.80
    $14.80 - $14.80
    $14.80

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 12", Second

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $21.90
    $21.90 - $21.90
    $21.90

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 10", Second

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $16.80
    $16.80 - $16.80
    $16.80

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 8", Second

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $13.20
    $13.20 - $13.20
    $13.20

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 14", Bastard

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $26.40
    $26.40 - $26.40
    $26.40

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 12", Bastard

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $20.30
    $20.30 - $20.30
    $20.30

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 10", Bastard

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $12.10
    $12.10 - $12.10
    $12.10

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 8", Bastard

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $9.48
    $9.48 - $9.48
    $9.48

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 6", Bastard

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $7.95
    $7.95 - $7.95
    $7.95

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 4", Bastard

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $7.95
    $7.95 - $7.95
    $7.95

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Taper Files - Extra Slim

    Taper File - Extra Slim, Triangle, 6"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $7.84
    $7.84 - $7.84
    $7.84

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 6" Manufacturer Part Number: 14665MN

    Taper Files - Extra Slim
    SPECIAL ORDER

    Taper Files - Extra Slim

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $6.59
    $6.59 - $6.59
    $6.59

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 5" Manufacturer Part Number: 14599MN

    Taper Files - Extra Slim

    Taper File - Extra Slim, Triangle, 4"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $7.33
    $7.33 - $7.33
    $7.33

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 4" Manufacturer Part Number: 14547MN

    Taper Files - Slim

    Taper File - Slim, Triangle, 8"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $10.70
    $10.70 - $10.70
    $10.70

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 8" Manufacturer Part Number: 14290MN

    Taper Files - Slim

    Taper File - Slim, Triangle, 7"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $8.97
    $8.97 - $8.97
    $8.97

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 7" Manufacturer Part Number: 14255MN

    Taper Files - Slim

    Taper File - Slim, Triangle, 6"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $7.23
    $7.23 - $7.23
    $7.23

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 6" Manufacturer Part Number: 14224MN

    Taper Files - Regular

    Taper File - Regular, Triangle, 8"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $13.80
    $13.80 - $13.80
    $13.80

    Triangular shape Edges set and cut for filing gullets between saw teeth Tapers slightly towards the point Shape: Triangle Length: 8" Manufacture...

    View full details
    Taper Files - Regular

    Taper File - Regular, Triangle, 6"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $8.97
    $8.97 - $8.97
    $8.97

    Triangular shape Edges set and cut for filing gullets between saw teeth Tapers slightly towards the point Shape: Triangle Length: 6" Manufacture...

    View full details
    Plastic Screw-On Handle
    Plastic

    Plastic Screw-On Handle

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $8.05
    $8.05 - $8.05
    $8.05

    Screw-on design fits most popular files for professional or home handymen Handle made of strong high-impact material, contoured to fit hand for st...

    View full details
    Plastic Screw-On Handle
    Plastic

    Plastic Screw-On Handle

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $7.54
    $7.54 - $7.54
    $7.54

    Screw-on design fits most popular files for professional or home handymen Handle made of strong high-impact material, contoured to fit hand for st...

    View full details
    Plastic Screw-On Handle
    Plastic

    Plastic Screw-On Handle

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $7.44
    $7.44 - $7.44
    $7.44

    Screw-on design fits most popular files for professional or home handymen Handle made of strong high-impact material, contoured to fit hand for st...

    View full details
    Plastic Screw-On Handle
    Plastic

    Plastic Screw-On Handle

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $7.33
    $7.33 - $7.33
    $7.33

    Screw-on design fits most popular files for professional or home handymen Handle made of strong high-impact material, contoured to fit hand for st...

    View full details
    Plastic Screw-On Handle
    Plastic

    Plastic Screw-On Handle

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $7.33
    $7.33 - $7.33
    $7.33

    Screw-on design fits most popular files for professional or home handymen Handle made of strong high-impact material, contoured to fit hand for st...

    View full details
    Plastic Screw-On Handle
    Plastic

    Plastic Screw-On Handle

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $6.52
    $6.52 - $6.52
    $6.52

    Screw-on design fits most popular files for professional or home handymen Handle made of strong high-impact material, contoured to fit hand for st...

    View full details
    Metal Ferruled Wooden Handles
    Wood

    Metal Ferruled Wooden Handles

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $4.48
    $4.48 - $4.48
    $4.48

    Made from close grain hardwood with nickel-plated metal ferrules Wax finish Packaging is recycable Material: Wood Manufacturer Part Number: 21503...

    View full details
    Metal Ferruled Wooden Handles
    Wood

    Metal Ferruled Wooden Handles

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $4.68
    $4.68 - $4.68
    $4.68

    Made from close grain hardwood with nickel-plated metal ferrules Wax finish Packaging is recycable Material: Wood Manufacturer Part Number: 21494...

    View full details
    Metal Ferruled Wooden Handles
    Wood

    Metal Ferruled Wooden Handles

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $5.19
    $5.19 - $5.19
    $5.19

    Made from close grain hardwood with nickel-plated metal ferrules Wax finish Packaging is recycable Material: Wood Manufacturer Part Number: 21485...

    View full details
    Metal Ferruled File Handle
    Wood

    Metal Ferruled File Handle

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $6.42
    $6.42 - $6.42
    $6.42

    Packaging is recycable Material: Wood Manufacturer Part Number: 21476N

    Metal Ferruled Wooden Handles
    SPECIAL ORDER
    Wood

    Metal Ferruled Wooden Handles

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $7.19
    $7.19 - $7.19
    $7.19

    Made from close grain hardwood with nickel-plated metal ferrules Wax finish Packaging is recycable Material: Wood Manufacturer Part Number: 21471...

    View full details
    Handy Files

    Handy File, Flat, 8", Double/Single

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $17.90
    $17.90 - $17.90
    $17.90

    One side is single-cut for use in tool sharpening and smoothing metal surfaces, reverse side is double-cut for general filing and rapid stock remo...

    View full details
    Handy Files

    Handy File, Flat, 8", Double/Single

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $17.90
    $17.90 - $17.90
    $17.90

    One side is single-cut for use in tool sharpening and smoothing metal surfaces, reverse side is double-cut for general filing and rapid stock remo...

    View full details
    Chainsaw File

    Chainsaw File, Round, 8", Knurl

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $5.91
    $5.91 - $5.91
    $5.91

    Pack of 3 Packaging is recycable Shape: Round Length: 8" Cut Type: Knurl Manufacturer Part Number: 02230B Diameter: 7/32"

    Chain Saw Files - Spiral Cut (Superior)

    Chain Saw Files - Spiral Cut (Superior), Round, 8", Double

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $5.91
    $5.91 - $5.91
    $5.91

    Pack of 3 Round shape Spiral cut 8" file has straight tang Spiral cut enables more material to be removed with each stroke, reducing amount of str...

    View full details
    Chain Saw Files - Round Smooth
    SPECIAL ORDER

    Chain Saw File, Round, 8", Knurl

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $7.54
    $7.54 - $7.54
    $7.54

    Round shape Smooth cut 6" files have a straight tang Packaging is recycable Shape: Round Length: 8" Cut Type: Knurl Manufacturer Part Number: T...

    View full details
    Chain Saw Files - Round Smooth

    Chain Saw File, Round, 8", Knurl

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $6.42
    $6.42 - $6.42
    $6.42

    Round shape Smooth cut 6" files have a straight tang Packaging is recycable Shape: Round Length: 8" Cut Type: Knurl Manufacturer Part Number: T...

    View full details

    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare

    Compare
    Cannot place order, conditions not met:
    OK