Hand Tools
Filters
- Aluminum File (0)
- Anti-Vibration Hammer (0)
- Ball Pein Hammer (0)
- Band File (0)
- Brick Hammer (0)
- Carpenter Claw Hammer (2)
- Chain Saw File (0)
- Chipping Hammer (0)
- Chisel Set (0)
- Club Hammer (0)
- Cold Chisel (0)
- Cordless Hammer Driver (1)
- Cordless Rotary Hammer (0)
- Cordless Screwdriver (0)
- Crimping Pliers (1)
- Cross Point Screwdriver (0)
- Dead Blow Hammer (0)
- Demolition Claw Hammer (0)
- Desktop File/Tray (0)
- Diagonal Cutting Pliers (1)
- End Cutting Pliers (0)
- Farmer's File (0)
- Fence Pliers (0)
- File Card With Brush (0)
- File Cart (0)
- File Folders (0)
- File Handle (0)
- File Set (0)
- File Storage Drawer (0)
- Flat File (0)
- Groove Joint Pliers (0)
- Half Round File (0)
- Hammer Drill (0)
- Hammer Handle (0)
- Hammer Set (0)
- Hammer Stapler (0)
- Hammer Tip (0)
- Hand File (0)
- Handy File (0)
- Hex Point Screwdriver (0)
- Hex Shank Rotary Hammer (0)
- Hose Pinch-Off Pliers (0)
- Insulated Pliers (0)
- Insulated Screwdriver (0)
- Jeweller's Screwdriver (0)
- Knife File (0)
- Lathe File (0)
- Linesman Pliers (1)
- Locking Pliers (4)
- Long Nose Pliers (1)
- Low Profile Pallet Truck (0)
- Low Profile Shop Cart (0)
- Masonry Chisel (0)
- Mill File (0)
- Multi Purpose Pliers (0)
- Multibit Screwdriver (0)
- Needle Nose Pliers (0)
- Nutsetter & Screwdriver Bit Sets (10)
- Phillips Screwdrivers (0)
- Plan File Parts & Accessories (0)
- Plan File Storage (0)
- Plier Ground Clamp (0)
- Plier Parts & Accessories (0)
- Plier Set (2)
- Plier Stapler (0)
- Pneumatic Band File (0)
- Pneumatic Screwdriver (0)
- Pneumatic Utility Hammer (0)
- Posidriv® Screwdriver (0)
- Punch & Chisel Set (0)
- Retaining Ring Pliers (0)
- Roll File Storage (0)
- Round File (0)
- Scaling Chisel (0)
- Screwdriver Bit Sockets (0)
- Screwdriver Insert Bit (1)
- Screwdriver Power Bit (27)
- Screwdriver Set (0)
- Side Cut Rebar Pliers (0)
- Sledge Hammer (0)
- Slip Joint Pliers (0)
- Slot Cabinet Tip Screwdrivers (0)
- Slot Keystone Screwdrivers (0)
- Soft Face Hammer (0)
- Specialty Pliers (0)
- Specialty Screwdriver (0)
- Square Drive Screwdriver (0)
- Square File (0)
- Tamper Proof Screwdriver (0)
- Taper File (0)
- Thread Restoring File (0)
- Three Square File (0)
- Torque Screwdriver (0)
- Torx® Screwdriver (0)
- Wall File Holder (0)
- Warding File (0)
- Wedge For Hammer Handle (0)
- Welding Pliers (0)
- Wire Stripping Pliers (0)
- Woodworking Hand Chisel (0)
- Apex (114)
- Arrow (3)
- ARROW (2)
- Aurora Tools (60)
- AURORA TOOLS (14)
- Bondhus (12)
- Brady (1)
- CHANNELOCK (2)
- Channelock (2)
- Chicago Pneumatic (3)
- CHICAGO PNEUMATIC (2)
- Crescent (8)
- CRESCENT (2)
- DEWALT (31)
- Dewalt (6)
- DYNABRADE (5)
- Dynabrade (1)
- DYNAMIC (9)
- Dynamic Tools (26)
- DYNAMIC TOOLS (1)
- ESSELTE (4)
- FELLOWES (1)
- Fellowes (1)
- Garant (7)
- GARANT (6)
- Gearwrench (17)
- GEARWRENCH (5)
- General Tools (5)
- GERBER (1)
- Gerber (1)
- GRIP-ON (1)
- Ingersoll Rand (2)
- IRWIN (42)
- Irwin (16)
- ITC (2)
- JET (59)
- JET EQUIPMENT (32)
- Klein Tools (73)
- KLEIN TOOLS (34)
- Kleton (6)
- KLETON (1)
- Lenco (4)
- LIND EQUIPMENT (1)
- Lind Equipment (1)
- MAKITA (2)
- Makita (2)
- Megapro (7)
- Milwaukee (73)
- MILWAUKEE (51)
- NICHOLSON BY CRESCENT (66)
- Nicholson By Crescent (65)
- OETIKER INC (2)
- Osborn (1)
- Paulin (2)
- Picquic (20)
- PICQUIC (15)
- Proto (12)
- Safco (21)
- SAFCO (11)
- shopSafety (2)
- SHUR-FAST (1)
- Stanley Bostitch (4)
- STANLEY BOSTITCH (2)
- Stanley Tools (21)
- STANLEY TOOLS (10)
- STOREX (1)
- The Harris Products Group (1)
- UTICA (4)
- Vega (172)
- Weld-Mate (4)
- Wera Tools (73)
- WERA TOOLS (41)
- Wilton (4)
- Wiss By Crescent (2)
- 1-1/2" (1)
- 1-7/8" (2)
- 3-5/8" (0)
- 3.5" (0)
- 4" (0)
- 4-1/8" (0)
- 4-1/2" (0)
- 4.25" (0)
- 5" (0)
- 5-1/2" (0)
- 5.1" (0)
- 6" (0)
- 6-1/2" (0)
- 6.25" (0)
- 6.5" (0)
- 6.9" (0)
- 7" (0)
- 7-1/2" (0)
- 7.6" (0)
- 8" (0)
- 8.4" (0)
- 10" (0)
- 10-1/2" (0)
- 11" (0)
- 12" (0)
- 13.5" (0)
- 14" (0)
- 15.5" (0)
- 16" (0)
- 16.37" (0)
- 25.75" (0)
- 36" (0)
- 70 mm (0)
- 10 3/4" (273 mm) (0)
- 14 1/4" (362 mm) (0)
- 14 3/5" (371 mm) (0)
- 19" (445 mm) (0)
- 216-312 in-lbs. (0)
Shockwave™ Impact Duty™ Magnetic Nut Driver, 3/8" Drive Size, 2-9/16" Length
MILWAUKEECustom Alloy76™ Steel is engineered to extend life Colour-coded band for easy size identification Designed for use with impact drivers and drill d...
View full detailsShockwave™ Impact Duty™ Magnetic Nut Driver, 1/4" Drive Size, 2-9/16" Length
MILWAUKEECustom Alloy76™ Steel is engineered to extend life Colour-coded band for easy size identification Designed for use with impact drivers and drill d...
View full detailsTorque Lock™ Locking Pliers Set, 2 Pieces
MILWAUKEEFaster setup and additional locking force compared to other locking tools Screwdriver through-hole provides you with leverage for tightening the t...
View full detailsTorque Lock™ Locking Pliers with Large Jaws, 12" Length, Curved Jaw
MILWAUKEEFaster setup and additional locking force compared to other locking tools Screwdriver through-hole provides you with leverage for tightening the t...
View full detailsTorque Lock™ Locking Pliers with Regular Jaws, 11" Length, C-Clamp
MILWAUKEEFaster setup and additional locking force compared to other locking tools Screwdriver through-hole provides you with leverage for tightening the t...
View full detailsTorque Lock™ Locking Pliers with Regular Jaws, 18" Length, C-Clamp
MILWAUKEEFaster setup and additional locking force compared to other locking tools Screwdriver through-hole provides you with leverage for tightening the t...
View full detailsTorque Lock™ Locking Pliers, 6" Length, Long Nose
MILWAUKEEFaster setup and additional locking force compared to other locking tools Screwdriver through-hole provides you with leverage for tightening the t...
View full detailsShockwave™ Impact Drill & Drive Set
MILWAUKEEWear Guard Tip™ protects fit over the life of the bit Up to 50X life vs other impact bits Precise fit custom machined tip prevents stripping and r...
View full detailsComfort Grip Crimping Pliers
MILWAUKEECrimping head for INS and NON-INS terminals, 10-22AWG Integrated reaming head Rust resistant Integrated wire cutting for 8-28AWG Comfort grips wil...
View full detailsComfort Grip Diagonal Cutting Pliers, 8" L
MILWAUKEEIron carbide edge hardened cutting edges, provides up to 2X more cuts The pliers have a tapered nose with flush cutting blades allowing users to c...
View full detailsComfort Grip Long Nose Pliers, 8" L
MILWAUKEEFeatures a 2" gripping nose letting user's to easily pull wire and material through rough-in holes and other tight spaces The pliers head features...
View full detailsComfort Grip High Leverage Lineman's Pliers with Crimper
MILWAUKEEIron carbide edge cutting edge more cuts over the life of the pliers Crimper on-board for INS and NON-INS terminals Fish tape puller on-board Comf...
View full detailsShockwave™ Torx Bit Set
MILWAUKEEWear Guard Tip™ protects fit over the life of the bit Optimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engi...
View full detailsShockwave™ Impact Driver Phillips & Square Bit Set
MILWAUKEEWear Guard Tip™ protects fit over the life of the bit Optimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engi...
View full detailsShockwave™ Impact Driver Bit Set, Square, #2, 1/4" Drive
MILWAUKEEWear Guard Tip™ protects fit over the life of the bit Optimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engi...
View full detailsShockwave™ Impact Driver Square Bit Set
MILWAUKEEWear Guard Tip™ protects fit over the life of the bit Optimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engi...
View full detailsShockwave™ Impact Duty™ Screwdriver Bit, Square, #2 Tip, 1/4" Drive Size, 3-1/2" Length
MILWAUKEEPack of 2 Wear Guard Tip™ protects fit over the life of the bit Custom Alloy76™ Steel is engineered to extend bit life Up to 50X life vs other imp...
View full detailsShockwave™ Impact Duty™ Screwdriver Bit, Square, #1 Tip, 1/4" Drive Size, 3-1/2" Length
MILWAUKEEPack of 2 Wear Guard Tip™ protects fit over the life of the bit Custom Alloy76™ Steel is engineered to extend bit life Up to 50X life vs other imp...
View full detailsShockwave™ Impact Duty™ Screwdriver Bit, Phillips, #3 Tip, 1/4" Drive Size, 3-1/2" Length
MILWAUKEEPack of 2 Wear Guard Tip™ protects fit over the life of the bit Custom Alloy76™ Steel is engineered to extend bit life Up to 50X life vs other imp...
View full detailsTorque Lock™ Locking Pliers Kit, 5 Pieces
MILWAUKEEFaster setup and additional locking force compared to other locking tools Hardened jaws with better grip force on jobsite material Rust protection...
View full detailsShockwave™ Impact Duty™ Magnetic Nut Driver, 5/16" Drive Size, 2-9/16" Length
MILWAUKEECustom Alloy76™ Steel is engineered to extend life Colour-coded band for easy size identification Designed for use with impact drivers and drill d...
View full detailsShockwave™ Impact Power Bits, Square, #3 Tip, 1/4" Drive Size, 2" Length
MILWAUKEEPack of 2 Optimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engineered to extend bit life Precise Fit Custom...
View full detailsM18™ Cordless Compact Hammer Drill/Driver (Tool Only), 1/2" Chuck, 18 V
MILWAUKEE4-Pole Frameless Motor features a robust design combined with rare-earth magnets for longer life All-metal gear case and chuck provide maximum imp...
View full detailsShockwave™ Impact Duty Driver Bit Set
MILWAUKEEGeometric shock absorption zone Heat-treated steel for maximum strength and durability Forged tips allows for a secure grip and maximum contact, e...
View full details
Smooth Face Hammer, 19 oz., Fibreglass Handle, 15-1/4" L
Smooth Face Hammer, 19 oz., Fibreglass Handle, 15-1/4" L
MILWAUKEE19 oz., Plain, Type: Fibreglass, 15-1/4"| Most durable fiberglass handle Magnetic nail set Head Weight: 19 oz. Face Finish: Plain Handle Type: F...
View full detailsShockwave™ Impact Duty™ Magnetic Nut Driver, 5/16" Drive Size, 1-7/8" Length
MILWAUKEECustom Alloy76™ Steel is engineered to extend life Colour-coded band for easy size identification Designed for use with impact drivers and drill d...
View full detailsShockwave™ Impact Power Bit, Phillips, #3 Tip, 1/4" Drive Size, 6" Length
MILWAUKEEOptimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engineered to extend bit life Precise Fit Custom Machined ...
View full detailsShockwave™ Impact Power Bit, Square, #3 Tip, 1/4" Drive Size, 3-1/2" Length
MILWAUKEEOptimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engineered to extend bit life Precise Fit Custom Machined ...
View full detailsShockwave™ Impact Duty™ Power Bit, Phillips, #3 Tip, 3-1/2" Length
MILWAUKEEWear Guard Tip™ protects fit over the life of the bit Custom Alloy76™ Steel is engineered to extend bit life Shockzones™ are optimized in both len...
View full detailsShockwave™ Impact Power Bit, Phillips, #2 Tip, 1/4" Drive Size, 3-1/2" Length
MILWAUKEEWear Guard Tip™ protects fit over the life of the bit Custom Alloy76™ Steel is engineered to extend bit life Shockzones™ are optimized in both len...
View full detailsShockwave™ Impact Power Bit, Phillips, #2 Tip, 1/4" Drive Size, 2" Length
MILWAUKEEPack of 5 Wear Guard Tip™ protects fit over the life of the bit Precise fit custom machined tip prevents stripping and reduces wobble Customized g...
View full detailsShockwave™ Impact Power Bit, Torx, T-30 Tip, 1/4" Drive Size, 3-1/2" Length
MILWAUKEEOptimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engineered to extend bit life Precise Fit Custom Machined ...
View full detailsShockwave™ Impact Duty™ Power Bit, Torx, T-25 Tip, 3-1/2" Length
MILWAUKEEWear Guard Tip™ protects fit over the life of the bit Custom Alloy76™ Steel is engineered to extend bit life Shockzones™ are optimized in both len...
View full detailsShockwave™ Impact Duty Driver Bit Set
MILWAUKEEDesigned for use with impact drivers or drill drivers Geometric shock absorption zone Machined tip prevents stripping and reduces wobble Alloy 76 ...
View full detailsShockwave™ Impact Duty Driver Bit Set
MILWAUKEEGeometric shock absorption zone Heat-treated steel for maximum strength and durability Forged tips allows for a secure grip and maximum contact, e...
View full detailsShockwave™ Impact Duty™ Magnetic Nut Driver Set
MILWAUKEEMade from proprietary steel and heat treated to control hardness Strong magnetic tip for secure grip Colour-coded band for easy size identificatio...
View full detailsShockwave™ Impact Duty™ Magnetic Nut Driver Set
MILWAUKEEMade from proprietary steel and heat treated to control hardness Strong magnetic tip for secure grip Colour-coded band for easy size identificatio...
View full detailsShockwave™ Insert Magnetic Nut Driver Set
MILWAUKEEPack of 5 Custom Alloy76™ Steel is engineered to extend life Insert style for use in Shockwave™ impact bit holders Colour-coded band for easy size...
View full detailsShockwave™ Impact Insert Bits, Phillips, #2 Tip, 1/4" Drive Size, 2" Length
MILWAUKEEPack of 15 Optimized Shockzone™ absorbs peak torque and prevents breaking Wear Guard Tip™ protects fit over the life of the bit Custom Alloy76™ St...
View full detailsShockwave™ Power Insert Bit, Square, #3 Tip, 1/4" Drive Size, 6" Length
MILWAUKEEHolds up under the high torque of impact applications Ideal for heavy-duty impact applications Tip Style: Square Drive Size: 1/4" Tip Size: #3 ...
View full detailsShockwave™ Impact Power Bit, Square, #2 Tip, 1/4" Drive Size, 6" Length
MILWAUKEEOptimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engineered to extend bit life Precise Fit Custom Machined ...
View full detailsShockwave™ Impact Power Bit, Phillips, #2 Tip, 1/4" Drive Size, 6" Length
MILWAUKEEOptimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engineered to extend bit life Precise Fit Custom Machined ...
View full detailsShockwave™ Power Insert Bit, Square, #2 Tip, 1/4" Drive Size, 6" Length
MILWAUKEEHolds up under the high torque of impact applications Ideal for heavy-duty impact applications Tip Style: Square Drive Size: 1/4" Tip Size: #2 ...
View full detailsShockwave™ Phillips Power Insert Bit, Phillips, #2 Tip, 1/4" Drive Size, 6" Length
MILWAUKEEHolds up under the high torque of impact applications Ideal for heavy-duty impact applications Tip Style: Phillips Drive Size: 1/4" Tip Size: #...
View full detailsShockwave™ Impact Power Bit, Square, #2 Tip, 1/4" Drive Size, 3-1/2" Length
MILWAUKEEOptimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engineered to extend bit life Precise Fit Custom Machined ...
View full detailsShockwave™ Impact Power Bit, Square, #1 Tip, 1/4" Drive Size, 3-1/2" Length
MILWAUKEEOptimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engineered to extend bit life Precise Fit Custom Machined ...
View full detailsShockwave™ Impact Power Bits, Square, #2 Tip, 1/4" Drive Size, 2" Length
MILWAUKEEPack of 5 Optimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engineered to extend bit life Precise Fit Custom...
View full detailsShockwave™ Impact Power Bit, Torx, T-20 Tip, 1/4" Drive Size, 3-1/2" Length
MILWAUKEEOptimized Shockzone™ absorbs peak torque and prevents breaking Custom Alloy76™ Steel is engineered to extend bit life Precise Fit Custom Machined ...
View full details