Skip to content

  • Aluminum File

  • Anti-Vibration Hammer

  • Ball Pein Hammer

  • Band File

  • Brick Hammer

  • Carpenter Claw Hammer

  • Chain Saw File

  • Chipping Hammer

  • Chisel Set

  • Club Hammer

  • Cold Chisel

  • Cordless Hammer Driver

  • Cordless Rotary Hammer

  • Cordless Screwdriver

  • Crimping Pliers

  • Cross Point Screwdriver

  • Dead Blow Hammer

  • Demolition Claw Hammer

  • Desktop File/Tray

  • Diagonal Cutting Pliers

  • End Cutting Pliers

  • Farmer's File

  • Fence Pliers

  • File Card With Brush

  • File Cart

  • File Folders

  • File Handle

  • File Set

  • File Storage Drawer

  • Flat File

  • Groove Joint Pliers

  • Half Round File

  • Hammer Drill

  • Hammer Handle

  • Hammer Set

  • Hammer Stapler

  • Hammer Tip

  • Hand File

  • Handy File

  • Hex Point Screwdriver

  • Hex Shank Rotary Hammer

  • Hose Pinch-Off Pliers

  • Insulated Pliers

  • Insulated Screwdriver

  • Jeweller's Screwdriver

  • Knife File

  • Lathe File

  • Linesman Pliers

  • Locking Pliers

  • Long Nose Pliers

  • Low Profile Pallet Truck

  • Low Profile Shop Cart

  • Masonry Chisel

  • Mill File

  • Multi Purpose Pliers

  • Multibit Screwdriver

  • Needle Nose Pliers

  • Nutsetter & Screwdriver Bit Sets

  • Phillips Screwdrivers

  • Plan File Parts & Accessories

  • Plan File Storage

  • Plier Ground Clamp

  • Plier Parts & Accessories

  • Plier Set

  • Plier Stapler

  • Pneumatic Band File

  • Pneumatic Screwdriver

  • Pneumatic Utility Hammer

  • Posidriv® Screwdriver

  • Power Chisel

  • Punch & Chisel Set

  • Retaining Ring Pliers

  • Roll File Storage

  • Round File

  • Scaling Chisel

  • Screwdriver Bit Sockets

  • Screwdriver Insert Bit

  • Screwdriver Power Bit

  • Screwdriver Set

  • SDS-Plus Rotary Hammer

  • Seaming Pliers

  • Side Cut Rebar Pliers

  • Sledge Hammer

  • Slip Joint Pliers

  • Slot Cabinet Tip Screwdrivers

  • Slot Keystone Screwdrivers

  • Soft Face Hammer

  • Specialty Pliers

  • Specialty Screwdriver

  • Square Drive Screwdriver

  • Square File

  • Tamper Proof Screwdriver

  • Taper File

  • Thread Restoring File

  • Three Square File

  • Torque Screwdriver

  • Torx® Screwdriver

  • Wall File Holder

  • Warding File

  • Wedge For Hammer Handle

  • Welding Pliers

  • Wire Stripping Pliers

  • Woodworking Hand Chisel

    • Hand Tools

    Filters

    $
    $
    Onyx™ USB Powered Desk Organizer
    Mesh

    Onyx™ USB Powered Desk Organizer

    Safco
    $0.00 - $0.00
    $0.00
    $183.75
    $183.75 - $183.75
    $183.75

    USB charging port Power cord included Three letter-sized trays Three 2" wide, upright file sections Width: 19-1/2" Depth: 11-1/2" Height: 8-1/4...

    View full details
    Onyx™ USB Powered Desk Organizer
    Mesh

    Onyx™ USB Powered Desk Organizer

    Safco
    $0.00 - $0.00
    $0.00
    $194.25
    $194.25 - $194.25
    $194.25

    USB charging port Power cord included Pullout storage drawer Side pockets for notebooks and folders Width: 18-1/4" Height: 4-1/2" Material: Mes...

    View full details
    Tubular Steel Wire Roll Files

    Tubular Steel Wire Roll Files

    SAFCO
    $0.00 - $0.00
    $0.00
    $330.75
    $330.75 - $330.75
    $330.75

    Low price, high quality appearance Light grey tubular steel frame with chrome plated grids Twin wheel casters (2 lock) Shipped knocked down No. o...

    View full details
    Print-lock® Hanging Clamps

    Print-lock® Hanging Clamps

    Safco
    $0.00 - $0.00
    $0.00
    $660.45
    $660.45 - $660.45
    $660.45

    Pack of 6 Clamps hold up to 100 sheets or 20 lbs. Green plastic label holders included Available in natural aluminum with polished chrome plated c...

    View full details
    Print-lock® Hanging Clamps

    Print-lock® Hanging Clamps

    Safco
    $0.00 - $0.00
    $0.00
    $418.95
    $418.95 - $418.95
    $418.95

    Pack of 6 Clamps hold up to 100 sheets or 20 lbs. Green plastic label holders included Available in natural aluminum with polished chrome plated c...

    View full details
    FacilTM Flat File Cabinets

    FacilTM Flat File Cabinets, 5 Drawers, 40" W x 26" D x 16-3/8" H

    SAFCO
    $0.00 - $0.00
    $0.00
    $2,476.95
    $2,476.95 - $2,476.95
    $2,476.95

    A unique version of our existing 5-drawer flat steel plan files Offers similar functions yet more manageable features such as non locking, non arc...

    View full details
    FacilTM Flat File Cabinets

    FacilTM Flat File Cabinets, 5 Drawers, 46" W x 32" D x 16-3/8" H

    SAFCO
    $0.00 - $0.00
    $0.00
    $3,075.45
    $3,075.45 - $3,075.45
    $3,075.45

    A unique version of our existing 5-drawer flat steel plan files Offers similar functions yet more manageable features such as non locking, non arc...

    View full details
    Warding Files

    Warding File, Flat, 6", Smooth

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $20.90
    $20.90 - $20.90
    $20.90

    Used primarily by locksmiths in repairing and filing ward notches in keys Thin rectangular shape Double-cut on sides, single-cut on edges Also sui...

    View full details
    Warding Files

    Warding File, Flat, 4", Smooth

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $17.75
    $17.75 - $17.75
    $17.75

    Used primarily by locksmiths in repairing and filing ward notches in keys Thin rectangular shape Double-cut on sides, single-cut on edges Also sui...

    View full details
    Warding Files

    Warding File, Flat, 6", Bastard

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $16.28
    $16.28 - $16.28
    $16.28

    Used primarily by locksmiths in repairing and filing ward notches in keys Thin rectangular shape Double-cut on sides, single-cut on edges Also sui...

    View full details
    Long Angle Lathe Files - Fine

    Long Angle Lathe File - Fine, Flat, 14"

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $46.10
    $46.10 - $46.10
    $46.10

    Specially designed for finishing rapid stock removal on lathe work Rectangular shape Safe edges Cut faster than regular mill files and leave smoot...

    View full details
    Long Angle Lathe Files - Fine

    Long Angle Lathe File - Fine, Flat, 12"

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $35.60
    $35.60 - $35.60
    $35.60

    Specially designed for finishing rapid stock removal on lathe work Rectangular shape Safe edges Cut faster than regular mill files and leave smoot...

    View full details
    Long Angle Lathe Files - Fine

    Long Angle Lathe File - Fine, Flat, 10"

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $26.15
    $26.15 - $26.15
    $26.15

    Specially designed for finishing rapid stock removal on lathe work Rectangular shape Safe edges Cut faster than regular mill files and leave smoot...

    View full details
    Long Angle Lathe Files - Fine

    Long Angle Lathe File - Fine, Flat, 8"

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $19.85
    $19.85 - $19.85
    $19.85

    Specially designed for finishing rapid stock removal on lathe work Rectangular shape Safe edges Cut faster than regular mill files and leave smoot...

    View full details
    Aluminum Files - Type "A" Flat

    Aluminum Files - Type "A" Flat, Flat, 12", Double

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $34.55
    $34.55 - $34.55
    $34.55

    Special tooth construction eliminates clogging when filing aluminum Flat shape Double-cut All sizes have same number of teeth per inch Smooth fini...

    View full details
    Aluminum Files - Type "A" Flat

    Aluminum Files - Type "A" Flat, Flat, 8", Double

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $20.90
    $20.90 - $20.90
    $20.90

    Special tooth construction eliminates clogging when filing aluminum Flat shape Double-cut All sizes have same number of teeth per inch Smooth fini...

    View full details
    Electric Dynafile® II Abrasive Belt Machines

    Electric Dynafile® II Abrasive Belt Machines

    DYNABRADE
    $0.00 - $0.00
    $0.00
    $981.75
    $981.75 - $981.75
    $981.75

    Runs coated-abrasive and non-woven nylon belts Ideal for grinding, deburring, blending, finishing and surface conditioning Tool includes model THZ...

    View full details
    Square Files

    Square File, Square, 6", Smooth

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $16.28
    $16.28 - $16.28
    $16.28

    Used on slots, keyways and general surface filing Square shape Double-cut Tapered slightly towards point Larger sizes frequently preferred to corr...

    View full details
    Square Files

    Square File, Square, 10", Bastard

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $21.95
    $21.95 - $21.95
    $21.95

    Used on slots, keyways and general surface filing Square shape Double-cut Tapered slightly towards point Larger sizes frequently preferred to corr...

    View full details
    Square Files

    Square File, Square, 6", Bastard

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $14.18
    $14.18 - $14.18
    $14.18

    Used on slots, keyways and general surface filing Square shape Double-cut Tapered slightly towards point Larger sizes frequently preferred to corr...

    View full details
    Square Files

    Square File, Square, 4", Bastard

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $13.55
    $13.55 - $13.55
    $13.55

    Used on slots, keyways and general surface filing Square shape Double-cut Tapered slightly towards point Larger sizes frequently preferred to corr...

    View full details
    Belt Sander
    Belt Sander
    Multiple options

    Belt Sander

    Aurora Tools
    $0.00 - $306.60
    $0.00
    $236.25 - $306.60
    $236.25 - $306.60
    $236.25

    Low-noise Forward-reverse switch Easy belt changes Air Consumption: 16 CFM Air Inlet: 1/4" NPTF Sound Level (dBA): 85 No Load RPM: 16500 Powe...

    View full details
    Electric Dynafile® II Abrasive Belt Machines

    Electric Dynafile® II Abrasive Belt Machines, 1/8" - 3/4"

    DYNABRADE
    $0.00 - $0.00
    $0.00
    $1,416.45
    $1,416.45 - $1,416.45
    $1,416.45

    ELECTRIC DYNAFILE® II VERSATILITY KITS Includes model TGY744 electric Dynafile® II with model THZ341 contact arm and two additional arms models TH...

    View full details
    Dynafile® II Abrasive Belt Machines

    Dynafile® II Abrasive Belt Machines, 1/4" - 3/4" x 20 1/2", 28 CFM, 1/4" NPT

    DYNABRADE
    $0.00 - $0.00
    $0.00
    $1,748.25
    $1,748.25 - $1,748.25
    $1,748.25

    Grind, deburr, blend and polish, on metal, plastic, fiberglass, composites, rubber, glass and more Grind from contact wheel or platen pad; finish ...

    View full details
    Mill Files

    Mill File, Flat, 10", Smooth

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $17.33
    $17.33 - $17.33
    $17.33

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 8", Smooth

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $15.23
    $15.23 - $15.23
    $15.23

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 12", Second

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $22.58
    $22.58 - $22.58
    $22.58

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 10", Second

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $17.33
    $17.33 - $17.33
    $17.33

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 8", Second

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $13.55
    $13.55 - $13.55
    $13.55

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 14", Bastard

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $27.20
    $27.20 - $27.20
    $27.20

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 12", Bastard

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $20.90
    $20.90 - $20.90
    $20.90

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 10", Bastard

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $12.50
    $12.50 - $12.50
    $12.50

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 8", Bastard

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $9.75
    $9.75 - $9.75
    $9.75

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 6", Bastard

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $8.18
    $8.18 - $8.18
    $8.18

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Mill Files

    Mill File, Flat, 4", Bastard

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $8.18
    $8.18 - $8.18
    $8.18

    Used for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...

    View full details
    Taper Files - Extra Slim

    Taper File - Extra Slim, Triangle, 6"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $8.07
    $8.07 - $8.07
    $8.07

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 6" Manufacturer Part Number: 14665MN

    Taper Files - Extra Slim

    Taper Files - Extra Slim

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $6.92
    $6.92 - $6.92
    $6.92

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 5" Manufacturer Part Number: 14599MN

    Taper Files - Extra Slim

    Taper File - Extra Slim, Triangle, 4"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $7.55
    $7.55 - $7.55
    $7.55

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 4" Manufacturer Part Number: 14547MN

    Taper Files - Slim

    Taper File - Slim, Triangle, 8"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $11.03
    $11.03 - $11.03
    $11.03

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 8" Manufacturer Part Number: 14290MN

    Taper Files - Slim

    Taper File - Slim, Triangle, 7"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $9.23
    $9.23 - $9.23
    $9.23

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 7" Manufacturer Part Number: 14255MN

    Taper Files - Slim

    Taper File - Slim, Triangle, 6"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $7.44
    $7.44 - $7.44
    $7.44

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 6" Manufacturer Part Number: 14224MN

    Taper Files - Slim

    Taper File - Slim, Triangle, 5"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $6.71
    $6.71 - $6.71
    $6.71

    Triangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 5" Manufacturer Part Number: 14162MN

    Taper Files - Regular

    Taper File - Regular, Triangle, 8"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $14.18
    $14.18 - $14.18
    $14.18

    Triangular shape Edges set and cut for filing gullets between saw teeth Tapers slightly towards the point Shape: Triangle Length: 8" Manufacture...

    View full details
    Taper Files - Regular

    Taper File - Regular, Triangle, 6"

    NICHOLSON BY CRESCENT
    $0.00 - $0.00
    $0.00
    $9.23
    $9.23 - $9.23
    $9.23

    Triangular shape Edges set and cut for filing gullets between saw teeth Tapers slightly towards the point Shape: Triangle Length: 6" Manufacture...

    View full details
    Plastic Screw-On Handle
    Plastic

    Plastic Screw-On Handle

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $8.28
    $8.28 - $8.28
    $8.28

    Screw-on design fits most popular files for professional or home handymen Handle made of strong high-impact material, contoured to fit hand for st...

    View full details
    Plastic Screw-On Handle
    Plastic

    Plastic Screw-On Handle

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $7.76
    $7.76 - $7.76
    $7.76

    Screw-on design fits most popular files for professional or home handymen Handle made of strong high-impact material, contoured to fit hand for st...

    View full details
    Plastic Screw-On Handle
    Plastic

    Plastic Screw-On Handle

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $7.65
    $7.65 - $7.65
    $7.65

    Screw-on design fits most popular files for professional or home handymen Handle made of strong high-impact material, contoured to fit hand for st...

    View full details
    Plastic Screw-On Handle
    Plastic

    Plastic Screw-On Handle

    Nicholson By Crescent
    $0.00 - $0.00
    $0.00
    $7.55
    $7.55 - $7.55
    $7.55

    Screw-on design fits most popular files for professional or home handymen Handle made of strong high-impact material, contoured to fit hand for st...

    View full details

    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare

    Compare