Drums & Drum Handling

Use 2" size for thick, viscous liquids or larger volume flow of thin liquid Half turn on/off; stays open until shut-off Ideal for use with non-fla...

Fits 45 imp. gal./55 US gal. drums Unpainted finish No gaskets or fittings included Manufacturer Part Number: NDHDS0350

Welded 3/16" thick x 4", frames are built to withstand constant use 24" inside diameter handles 45 imp. gal./55 US gal. drums Comes with four swiv...

Welded 3/16" thick x 4", frames are built to withstand constant use 24" inside diameter handles 45 imp. gal./55 US gal. drums Comes with four swiv...

WARNING! Before ordering any faucet, establishing compatibility with the MSDS of the fluid used in application is a must! Standard 3/4" tapered pi...

WARNING! Before ordering any faucet, establishing compatibility with the MSDS of the fluid used in application is a must! For non-flammable liquid...

Horizontally lifts 45 imp. gal./55 US gal. steel drums, 34"-36" long Alloy steel lifting ring, steel rods, malleable iron hooks Drum Capacity: 55...

For use with most dispensing and transferring non-corrosive and petroleum based fluids Cushioned vinyl grip handle Discharge spout can be rotated ...

For use with certain water-based solvents, strongest acids or alkaline solutions Adapts to 1-1/2" or 2" bung adaptor for 5 to 55-gallon drums WARN...

For use with most water-based solvents, strong acids or alkalis and light viscosity petroleum liquids Adapts to 1-1/2" or 2" bung adaptor for 5 to...

Polyethylene dolly will not dent, corrode, or rust Handles 30 imp. gal./37 US gal.& 45 imp. gal./55 US gal. drums Solid bottom construction wi...

Polyethylene dolly will not dent, corrode, or rust Handles 30 imp. gal./37 US gal.& 45 imp. gal./55 US gal. drums Solid bottom construction wi...

Polyethylene dolly will not dent, corrode, or rust Handles 30 imp. Gal./37 US gal.& 45 imp. Gal./55 US gal. drums Solid bottom construction wi...

Offset handle Fits almost any metal or plastic, male or female bung nuts or plugs 13" overall length Material: Manganese Bronze Alloy Weight: 4 ...

Offset handle 13" overall length Fits almost any metal or plastic, male or female bung nuts or plugs Material: Annealed Ductile Iron Weight: 4 l...

Safe method of upending drums for moving, draining or storing No lifting, straining, or danger of drum tipping backwards Load drum into the draini...

Made of FDA compliant materials Formed lip grips chime of drum and stays in place during follower plate pumping Smooth wall inserts withstand mixi...

Eliminates the risk of spills during transport with its 57-gallon sump capacity Caster wheels let you move around freely, while its ergonomically ...

Steel drum rack has four-way fork truck access for ideal operation Do not stack more than four racks high for safety and maximum efficiency Featur...

Cylindrical film liners are heat-sealed and made FDA compliant materials Available in anti-static for solvent-based applications Available in 40" ...

Available in 40" height to fold over drum or 53" height to tie off Cylindrical film liners are heat-sealed and made FDA compliant materials Availa...

Available in 40" height to fold over drum or 53" height to tie off Available in anti-static for solvent-based applications Cylindrical film liners...

Cylindrical film liners are heat-sealed and made FDA compliant materials Available in anti-static for solvent-based applications Available in 40" ...

Available in 40" height to fold over drum or 53" height to tie off Cylindrical film liners are heat-sealed and made FDA compliant materials Availa...

Available in anti-static for solvent-based applications Cylindrical film liners are heat-sealed and made FDA compliant materials Available in 40" ...

Cylindrical film liners are heat-sealed and made FDA compliant materials Available in anti-static for solvent-based applications Available in 40" ...

Remove material nearly as fast as regular flap wheels while leaving a finer finish thanks to the non-woven material between each sanding flap Exce...

Dual-action siphon-lift pump Easily transfers fuel from one vehicle or container to another without danger of inhaling liquid Siphons downhill if ...

Has an automatic mechanical operation Great for positioning, drums in and out of overpacks Steel construction with spring loaded arms for safety D...

Ideal for safe storage, handling and transportation of various materials, spill containment and clean-up, waste disposal and incineration Reduce w...

Accurate pouring from any height Rotation of drum is controlled by 6' chain loop Optional MORStop ™ tilt brake holds drum tilt position constant e...

Manufacturer Part Number: 07M445 Arbor Hole Size: 5/8"-11 Grit: S-Fine Width: 4" Diameter: 4-1/2"

Polish, burnish, blend, deburr, clean and brighten in stainless steel, aluminum, brass, copper and other alloys Will give uniform and consistent f...

Manufacturer Part Number: 07K442 Arbor Hole Size: 5/8"-11 Width: 4-1/2" Grit: 80 Diameter: 4-1/2"

Manufacturer Part Number: 4GT

Manufacturer Part Number: 0132-301

Safe method of upending drums for moving, draining or storing No lifting, straining, or danger of drum tipping backwards Load drum into the draini...

Can be used to open and close drum bungs and plugs, as well as working as a bung wrench, ring wrench, and faucet wrench Fits all types of industri...

Dual Head - 2.5 lbs. Fits other types of closures too Socket head which fits over 3/4" plugs andprongs that fit the crossbar of 2" plugs Manufactu...

Can be used to open and close drum bungs and plugs, as well as working as a bung wrench, ring wrench, and faucet wrench Fits all types of industri...

Adjustable to handle drums from 31" to 39" tall Can be added to most of our Morse drum lifting equipment Add this option to handle your fibre drum...

Manufacturer Part Number: 14-P

Features hinged folding design for storage Safety restraint included Welded steel construction with a baked-in-powder-coated toughness Drum Capac...

Accurate pouring from any height Handles drums up to 2000 lbs full drum capacity Rotation of drum is controlled by 6' chain loop Optional MORStop ...

Designed to test drain, vent and waste systems to 17 PSI backpressure Extra large zinc wing nut for ease of tightening. No wrench required Natural...

FM approved Internal flame arrestor Approved for use with oils, flammables and non-flammables, compatible with stainless steel Teflon® gasket, 3/4...

Provides thermal insulation and protects sensitive products The unique Lok-Rim® closure allows easy opening and closing Will not corrode and conta...

Ideal for safe storage, handling and transportation of various materials, spill containment and clean-up, waste disposal and incineration Reduce w...