Cut Resistant Gloves
Filters
- Akka (7)
- Ansell (91)
- ANSELL (1)
- ATG (2)
- BCL Glove Ltd (6)
- Bob Dale Gloves (30)
- Ergodyne (4)
- Hexarmor (33)
- Honeywell (9)
- HONEYWELL (5)
- JOMAC CANADA (8)
- Jomac Canada (6)
- Kimberly-Clark (2)
- Mcr Safety (6)
- Mechanix Wear (19)
- Milwaukee (14)
- MILWAUKEE (1)
- Pioneer (2)
- Protective Industrial Products (41)
- PROTECTIVE INDUSTRIAL PRODUCTS (7)
- Ronco (1)
- shopSafety (1)
- shopSafety.ca (5)
- Showa (34)
- Superior Glove Works Ltd. (183)
- SUPERIOR GLOVE WORKS LTD. (40)
- Viking (2)
- Watson Gloves (17)
- Zenith Safety Products (26)
- ZENITH SAFETY PRODUCTS (2)
- X-Small (4)
- Small (11)
- Medium (13)
- Large (15)
- X-Large (15)
- 2X-Large (12)
- 3X-Large (2)
- 5 (2)
- 6 (6)
- 7 (10)
- 8 (12)
- 9 (13)
- 10 (12)
- 11 (11)
- 12 (5)
- 14 (1)
- 2X-Large/10 (4)
- 2X-Large/11 (25)
- 2X-Large/12 (2)
- 2X-Small/5 (3)
- 3X-Large/12 (6)
- Large/8 (3)
- Large/9 (37)
- Large/10 (3)
- Medium/7 (3)
- Medium/8 (34)
- Medium/9 (2)
- Small/6 (3)
- Small/7 (31)
- Small/8 (2)
- X-Large/9 (6)
- X-Large/10 (34)
- X-Large/11 (2)
- X-Small/6 (18)
- Black (39)
- Black & Blue (8)
- Black & Green (1)
- Black & Grey (8)
- Black & Red (3)
- Black and Grey (7)
- Black and Yellow (2)
- Black on salt & pepper (1)
- Black/Black (2)
- Black/Grey (1)
- Black/Hi Viz Yellow (3)
- Blue (13)
- Blue & Black (3)
- Burgundy (2)
- EN 388 Level P & ANSI Level 2 (1)
- Green (5)
- Grey (27)
- Grey & Black (3)
- Grey & Blue (2)
- Grey & Red (5)
- Grey & White (1)
- Grey/Blue (1)
- Grey/Green (2)
- Grey/Grey (6)
- Grey/White (1)
- Hi-Vis Yellow (3)
- High Visibility Lime (1)
- Light Blue & Grey (1)
- Purple (7)
- Red & Black (1)
- Salt & Pepper (5)
- Tan (2)
- Tan & Black (1)
- White (6)
- White on white (1)
- Yellow (6)
- Yellow/Black (2)
S-TEX Cut Resistant Gloves
S-TEX Cut Resistant Gloves
ShowaPair Reinforced with a stainless steel liner Kevlar® fibers with Hagane Coil® technology Breathable open back design Excellent wet and dry grip Su...
View full detailsSuperior Touch® Cut Resistant Palm-Coated Gloves, Size 2X-Large/11, 13 Gauge, Polyurethane Coated, Dyneema® Shell, ANSI/ISEA 105 Level 2
SUPERIOR GLOVE WORKS LTD.Pair Polyurethane-Coated Gloves made with Dyneema® Comfortable fit, high dexterity and flexibility Lint free Accepted for use in Canadian food pro...
View full detailsPowerFlex® Plus 80-600 Gloves, Size Medium/8, 10 Gauge, Rubber Latex Coated, Kevlar® Shell, ASTM ANSI Level A2/EN 388 Level C
AnsellPair 100% Kevlar® liner with crinkle latex palm coating Provides cut, abrasion and puncture resistance Superior wet and dry grip Seamless Kevlar® ...
View full detailsS-Tex 376 Gloves, Size X-Large/9, 13 Gauge, Foam Nitrile Coated, Polyester/Stainless Steel Shell, ANSI/ISEA 105 Level 4
ShowaPair 3/4 coated nitrile with an additional coating of foam nitrile on the palm and fingertips Seamless 13 gauge Hagane Coil® knitted liner Protect...
View full detailsS-Tex 376 Gloves, Size 6/Small, 13 Gauge, Foam Nitrile Coated, Polyester/Stainless Steel Shell, ANSI/ISEA 105 Level 4
ShowaPair 3/4 coated nitrile with an additional coating of foam nitrile on the palm and fingertips Seamless 13 gauge Hagane Coil® knitted liner Protect...
View full detailsMechanics+ 4018 Gloves, Size Small/7, SuperFabric® Shell, ANSI/ISEA 105 Level 5
HexarmorPair High comfort and dexterity Durable and long lasting Puncture protection on the palm from wires, metal and glass Synthetic leather palm for en...
View full detailsCoated Synthetic Gloves, Size 8, 13 Gauge, HPT™ Coated, Nylon Shell, ANSI/ISEA 105 Level 1
Bob Dale GlovesPair Resists punctures and abrasion Seamless knit liner is exceptionally comfortable, lightweight and breathable Treated with Actifresh® to elimin...
View full detailsCoated Synthetic Gloves, Size 7, 13 Gauge, HPT™ Coated, Nylon Shell, ANSI/ISEA 105 Level 1
Bob Dale GlovesPair Resists punctures and abrasion Seamless knit liner is exceptionally comfortable, lightweight and breathable Treated with Actifresh® to elimin...
View full detailsCoated Synthetic Gloves, Size 11, 13 Gauge, HPT™ Coated, Nylon Shell, ANSI/ISEA 105 Level 1
Bob Dale GlovesPair Resists punctures and abrasion Seamless knit liner is exceptionally comfortable, lightweight and breathable Treated with Actifresh® to elimin...
View full details
Handguard II Glove, Size X-Large/10, 5.5 Gauge, Stainless Steel/Kevlar®/Spectra® Shell, ANSI/ISEA 105 Level 5
Handguard II Glove, Size X-Large/10, 5.5 Gauge, Stainless Steel/Kevlar®/Spectra® Shell, ANSI/ISEA 105 Level 5
JOMAC CANADASize: X-Large/10, 5.5, Material: Kevlar®/Stainless Steel/Spectra®, ANSI/ISEA 105 Level 5, Not Coated, Colour: White, Material: Knit| The patented c...
View full details
Handguard II Glove, Size Large/9, 5.5 Gauge, Stainless Steel/Kevlar®/Spectra® Shell, ANSI/ISEA 105 Level 5
Handguard II Glove, Size Large/9, 5.5 Gauge, Stainless Steel/Kevlar®/Spectra® Shell, ANSI/ISEA 105 Level 5
JOMAC CANADASize: Large/9, 5.5, Material: Kevlar®/Stainless Steel/Spectra®, ANSI/ISEA 105 Level 5, Not Coated, Colour: White, Material: Knit| The patented comb...
View full details
Handguard II Glove, Size Medium/8, 5.5 Gauge, Stainless Steel/Kevlar®/Spectra® Shell, ANSI/ISEA 105 Level 5
Handguard II Glove, Size Medium/8, 5.5 Gauge, Stainless Steel/Kevlar®/Spectra® Shell, ANSI/ISEA 105 Level 5
JOMAC CANADASize: Medium/8, 5.5, Material: Kevlar®/Stainless Steel/Spectra®, ANSI/ISEA 105 Level 5, Not Coated, Colour: White, Material: Knit| The patented com...
View full details
Handguard II Glove, Size Small/7, 5.5 Gauge, Stainless Steel/Kevlar®/Spectra® Shell, ANSI/ISEA 105 Level 5
Handguard II Glove, Size Small/7, 5.5 Gauge, Stainless Steel/Kevlar®/Spectra® Shell, ANSI/ISEA 105 Level 5
JOMAC CANADASize: Small/7, 5.5, Material: Kevlar®/Stainless Steel/Spectra®, ANSI/ISEA 105 Level 5, Not Coated, Colour: White, Material: Knit| The patented comb...
View full detailsATG MaxiFlex® Cut™ Gloves, Size 2X-Large, 15 Gauge, Foam Nitrile Coated, Engineered Yarn Shell, ASTM ANSI Level A2/EN 388 Level 3/EN 388 Level B
ATGPair MicroFoam nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance Raised micro dots in...
View full detailsATG MaxiFlex® Cut™ Gloves, Size X-Large, 15 Gauge, Foam Nitrile Coated, Engineered Yarn Shell, ASTM ANSI Level A2/EN 388 Level 3/EN 388 Level B
ATGPair MicroFoam nitrile coatings are compatible with light oils and will provide a good grip and excellent abrasion resistance Raised micro dots in...
View full detailsG-Tek® PolyKor® X7™ Neuroma® Cut Resistant Gloves, Size Large, 18 Gauge, Polyurethane Coated, Polyethylene Shell, ASTM ANSI Level A3/EN 388 Level C
PROTECTIVE INDUSTRIAL PRODUCTSPair G-Tek® PolyKor® X7™ Technology is a super lightweight and thin, 18 gauge reinforced yarn that provides cut resistance and durability by way o...
View full detailsG-Tek® PolyKor® X7™ Cut Resistant Gloves, Size 2X-Large, 18 Gauge, Polyurethane Coated, Polyethylene Shell, ASTM ANSI Level A7/EN 388 Level F
PROTECTIVE INDUSTRIAL PRODUCTSPair Seamless construction offers increased comfort and breathability PolyKor® blended shell with X7™ technology is super lightweight and thin, of...
View full detailsG-Tek® PolyKor® X7™ Cut Resistant Gloves, Size X-Large, 18 Gauge, Polyurethane Coated, Polyethylene Shell, ASTM ANSI Level A7/EN 388 Level F
PROTECTIVE INDUSTRIAL PRODUCTSPair Seamless construction offers increased comfort and breathability PolyKor® blended shell with X7™ technology is super lightweight and thin, of...
View full detailsG-Tek® PolyKor® X7™ Cut Resistant Gloves, Size Large, 18 Gauge, Polyurethane Coated, Polyethylene Shell, ASTM ANSI Level A7/EN 388 Level F
PROTECTIVE INDUSTRIAL PRODUCTSPair Seamless construction offers increased comfort and breathability PolyKor® blended shell with X7™ technology is super lightweight and thin, of...
View full detailsG-Tek® PolyKor® X7™ Cut Resistant Gloves, Size Medium, 18 Gauge, Polyurethane Coated, Polyethylene Shell, ASTM ANSI Level A7/EN 388 Level F
PROTECTIVE INDUSTRIAL PRODUCTSPair Seamless construction offers increased comfort and breathability PolyKor® blended shell with X7™ technology is super lightweight and thin, of...
View full details
Tilsatec® Cut Resistant Gloves
Tilsatec® Cut Resistant Gloves
shopSafetyPair RhinoYarn® cut resistant technology Hi-vis TPR rubber pads on the back of the fingers and knuckle area provide good impact protection Sandy n...
View full details
HyFlex™ Cut Resistant Gloves
HyFlex™ Cut Resistant Gloves
AnsellPair Water-based process is environmentally friendly, and has an innovative coating Silicone-free and DMF-free Excellent abrasion resistance Seaml...
View full details
Stealth Dog Fight Cut Resistant Gloves
Stealth Dog Fight Cut Resistant Gloves
Watson GlovesPair "Be safe, be seen" with hi-vis safety yellow, sandy nitrile coating Extended snug-fitting knit wrist Shell Material: HPPE/Nylon/Stainless St...
View full detailsProFlex® 812CR6 Cut Resistant Utility Gloves, Size X-Large, Armortex® Shell, ASTM ANSI Level A6/EN 388 Level 5/EN 388 Level E
ErgodynePair Next-generation Armortex®-backed palm for extreme cut protection Contrasting red fingertips for hand signaling Reinforced thumb saddle wear a...
View full detailsProFlex® 812CR6 Cut Resistant Utility Gloves, Size Large, Armortex® Shell, ASTM ANSI Level A6/EN 388 Level 5/EN 388 Level E
ErgodynePair Next-generation Armortex®-backed palm for extreme cut protection Contrasting red fingertips for hand signaling Reinforced thumb saddle wear a...
View full detailsProFlex® 812CR6 Cut Resistant Utility Gloves, Size Medium, Armortex® Shell, ASTM ANSI Level A6/EN 388 Level 5/EN 388 Level E
ErgodynePair Next-generation Armortex®-backed palm for extreme cut protection Contrasting red fingertips for hand signaling Reinforced thumb saddle wear a...
View full detailsDexterity® Cut-Resistant Gloves, Size Small/7, 13 Gauge, Foam Nitrile Coated, Kevlar® Shell, ASTM ANSI Level A4
SUPERIOR GLOVE WORKS LTD.Pair Foam nitrile coating on the palms delivers good puncture and abrasion resistance, plus a superior grip in oil Dipped over an ergonomic hand f...
View full detailsDexterity® Cut-Resistant Gloves, Size 5/2X-Small, 13 Gauge, Foam Nitrile Coated, Kevlar® Shell, ASTM ANSI Level A4
SUPERIOR GLOVE WORKS LTD.Pair Foam nitrile coating on the palms delivers good puncture and abrasion resistance, plus a superior grip in oil Dipped over an ergonomic hand f...
View full details
Coated Synthetic Gloves, Size X-Large/10, 13 Gauge, HPT™ Coated, Nylon Shell, ANSI/ISEA 105 Level 1
Coated Synthetic Gloves, Size X-Large/10, 13 Gauge, HPT™ Coated, Nylon Shell, ANSI/ISEA 105 Level 1
Bob Dale GlovesPair Resists punctures and abrasion Seamless knit liner is exceptionally comfortable, lightweight and breathable Treated with Actifresh® to elimin...
View full details
Coated Synthetic Gloves, Size Large/9, 13 Gauge, HPT™ Coated, Nylon Shell, ANSI/ISEA 105 Level 1
Coated Synthetic Gloves, Size Large/9, 13 Gauge, HPT™ Coated, Nylon Shell, ANSI/ISEA 105 Level 1
Bob Dale GlovesPair Resists punctures and abrasion Seamless knit liner is exceptionally comfortable, lightweight and breathable Treated with Actifresh® to elimin...
View full details
Cold Grip Plus 5™ Gloves
Cold Grip Plus 5™ Gloves
HoneywellPair Unique shell construction with cut-resistant outer liner and thermal inner lining provides excellent insulation from the cold High-viz orange...
View full detailsSuperior Touch® Cut Resistant Palm-Coated Gloves, Size Small/7, 13 Gauge, Foam Nitrile Coated, Dyneema® Shell, ANSI/ISEA 105 Level 2
SUPERIOR GLOVE WORKS LTD.Pair Size: Small/7 Gauge: 13 Shell Material: Dyneema® Cut Resistance: ANSI/ISEA 105 Level 2 Coating: Foam Nitrile Coating Style: Dipped Palm...
View full detailsCut-Resistant Gloves, Size X-Large/10, 13 Gauge, Nitrile Coated, TenActiv™ Shell, ANSI/ISEA 105 Level 2
SUPERIOR GLOVE WORKS LTD.Pair TenActiv™ yarn is comfortable, breathable and won't absorb sweat or moisture Micropore nitrile coating provides excellent grip by displacing ...
View full details
Cut-Resistant Gloves, Size Large/9, 13 Gauge, Nitrile Coated, TenActiv™ Shell, ANSI/ISEA 105 Level 2
Cut-Resistant Gloves, Size Large/9, 13 Gauge, Nitrile Coated, TenActiv™ Shell, ANSI/ISEA 105 Level 2
SUPERIOR GLOVE WORKS LTD.Pair TenActiv™ yarn is comfortable, breathable and won't absorb sweat or moisture Micropore nitrile coating provides excellent grip by displacing ...
View full detailsCut-Resistant Gloves, Size Medium/8, 13 Gauge, Nitrile Coated, TenActiv™ Shell, ANSI/ISEA 105 Level 2
SUPERIOR GLOVE WORKS LTD.Pair TenActiv™ yarn is comfortable, breathable and won't absorb sweat or moisture Micropore nitrile coating provides excellent grip by displacing ...
View full details
4561 Gloves
4561 Gloves
ShowaPair Highly abrasion-resistant Breathable liner keeps hands dry and comfortable Zorb-IT® palm finish absorbs oil to improve grip in oily environme...
View full details
4561 Gloves
4561 Gloves
ShowaPair Highly abrasion-resistant Breathable liner keeps hands dry and comfortable Zorb-IT® palm finish absorbs oil to improve grip in oily environme...
View full details
Coated Synthetic Knit Gloves
Coated Synthetic Knit Gloves
Bob Dale GlovesPair Excellent cut resistance Flexible and breathable Elastic wrist for secure fit and feel Machine-washable Gauge: 13 Shell Material: HPPE Cut...
View full detailsKleenGuard™ G60 Purple Nitrile™ Cut Resistant Gloves, Size 6/X-Small, 13 Gauge, Nitrile Coated, UHMWPE Shell, ANSI/ISEA 105 Level 3
Kimberly-ClarkPair High level of cut resistance with enhanced dexterity, grip and comfort Ambidextrous and breathable with a flexible dotted palm for better gri...
View full details3416 Gloves, Size X-Large, 13 Gauge, Foam Neoprene Coated, HPPE Shell, EN 388 Level 5
ShowaPair Protection against a wide range of chemicals, including acids, caustics, solvents, grease and oil Flexible coating with maximum comfort and p...
View full details3416 Gloves, Size Large, 13 Gauge, Foam Neoprene Coated, HPPE Shell, EN 388 Level 5
ShowaPair Protection against a wide range of chemicals, including acids, caustics, solvents, grease and oil Flexible coating with maximum comfort and p...
View full details3416 Gloves, Size Medium, 13 Gauge, Foam Neoprene Coated, HPPE Shell, EN 388 Level 5
ShowaPair Protection against a wide range of chemicals, including acids, caustics, solvents, grease and oil Flexible coating with maximum comfort and p...
View full detailsVis-Tech Y9294 Cut Resistant Gloves, Size X-Large/10, 13 Gauge, Polyurethane Coated, Stainless Steel Shell, ANSI/ISEA 105 Level 4
JOMAC CANADAPair Hi-vis cut resistant shell provides a high level of protection & creates awareness in tough environments Polyurethane palm coating provid...
View full details
Akka® Cut Resistant Glove
Akka® Cut Resistant Glove
BCL Glove LtdPair Lightweight and comfortable with exceptional dexterity Cut resistance rating is highest in the industry Fiberglass and nylon knit is ideal fo...
View full detailsDexterity® Knit Gloves, Size X-Large/10, 10 Gauge, Rubber Latex Coated, Punkban™ Shell, ANSI/ISEA 105 Level 5
SUPERIOR GLOVE WORKS LTD.Pair Dependable grip , excellent flexibility and a comfortable ergonomic shape String-knit glove with a hi-viz lime green puncture-resistant latex...
View full detailsDexterity® Knit Gloves, Size Large/9, 10 Gauge, Rubber Latex Coated, Punkban™ Shell, ANSI/ISEA 105 Level 5
SUPERIOR GLOVE WORKS LTD.Pair Dependable grip , excellent flexibility and a comfortable ergonomic shape String-knit glove with a hi-viz lime green puncture-resistant latex...
View full detailsDexterity® Knit Gloves, Size Medium/8, 10 Gauge, Rubber Latex Coated, Punkban™ Shell, ANSI/ISEA 105 Level 5
SUPERIOR GLOVE WORKS LTD.Pair Dependable grip , excellent flexibility and a comfortable ergonomic shape String-knit glove with a hi-viz lime green puncture-resistant latex...
View full details
HyFlex®11-731 Cut Resistant Gloves
HyFlex®11-731 Cut Resistant Gloves
AnsellPair Combination of ultra lightweight comfort and cut protection Light duty 18 gauge seamless liner provides enhanced flexibility and tactility Di...
View full details