Products

Manufacturer Part Number: STA-840338

Manufacturer Part Number: STA-840438

With mandrel; ; Typical Applications Removing surface defects Removing light edge burrs, parting lines or flashing Removing rust, oxides, corrosio...

With mandrel; ; Typical Applications Removing surface defects Removing light edge burrs, parting lines or flashing Removing rust, oxides, corrosio...

High initial and extended rate of cut Very flexible with high edge durability Effective on both flat and contoured surfaces; Typical Applications ...

High initial and extended rate of cut Very flexible with high edge durability Effective on both flat and contoured surfaces; Typical Applications ...

DUAL FOOT AIR CHUCKS 1/4" (F) NPT 6" long For regular live air lines. These chucks have a built-in shutoff valve and will not work on inflator gau...

DUAL FOOT AIR CHUCKs For hard-to-reach valves 1/4" (F) NPT 13" long For regular live air lines. These chucks have a built-in shutoff valve and wil...

DUAL FOOT CHUCKS Straight-on chuck with 30° reverse angle 14" long 1/4"(F) NPT For regular live air lines. These chucks have a built-in shutoff va...

HEX BALL FOOT AIR CHUCKS 3/4" hex 1/4" (F) NPT For regular live air lines. These chucks have a built-in shutoff valve and will not work on inflato...

LOCK-ON AIR CHUCKs Firmly locks onto valve when pushed forward 1/4" (F) NPT For regular live air lines. These chucks have a built-in shutoff valve...

Tip Style: Hex Drive Size: 1/4" Tip Size: 2.5 mm Overall Length: 1-7/8" Manufacturer Part Number: J4770-2.5M

3-stage standard duty desiccant system The standard duty desiccant system offers the same benefits as the heavy-duty system, but is designed for l...

Energy-storage devise with a similar function to a mechanical coil spring; applies a controlled force to support lids, doors, etc. that require as...

Metric 8 mm to 36 mm Chrome molybdenum alloy steel (CR-MO) for exceptional strength and long lasting durability High visibility laser-etched marki...

Knurled jaws for solid grip Durable design for long life Plastic-dipped handles Overall Length: 6-5/8" Manufacturer Part Number: D301-6

Knurled jaws for solid grip Durable design for long life Plastic-dipped handles Overall Length: 6-5/8" Manufacturer Part Number: D301-6C Note: H...

Permanent marking chalk for indoor or outdoor use Great for concrete, wood, or metal Provides great visibility Engineered flip-top cap that keeps ...

Temporary marking chalk for indoor or outdoor use Great for concrete, wood, or metal Provides great visibility Engineered flip-top cap that keeps ...

Chrome finish for maximum resistance against corrosion Large laser-etched markings improve size identification and provide differentiation between...

Contains: 4, 5, 6, 7, 8, 9, 10mm Chrome finish for maximum resistance against corrosion Large laser etched markings improve size identification an...

Contains: 6, 8, 10, 12, 14, 17, 19mm Chrome finish for maximum resistance against corrosion Large laser etched markings improve size identificatio...

Heavy-duty canvas duck Material: Canvas Colour: Beige No. of Pockets: 3 Style: Multiple Tool Holder Manufacturer Part Number: SW-721

This improved caulking gun is recommended for medium and light consistency caulks, sealants and adhesives Its sturdy steel construction will ensur...

Air Consumption: 4 CFM Air Inlet: 1/4" NPTF Sound Level (dBA): 94.4 Drive: 3/8" No Load RPM: 160 Manufacturer Part Number: 107XPA

Contains: 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 Chrome finish for maximum resistance against corrosion Large laser etched markings improve size id...

Contains: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 Chrome finish for maximum resistance against corrosion Large laser etched markings improve siz...

Made with stainless steel and high impact polymer components Smooth slider mechanism features an audible "click" and is self-locking for security ...

Can be locked at each listed length Tip section will not interlock Ideal for opening and closing disconnect switches, replacing fuses on transform...

Corrosion and chemical resistant all-metal body Ultra-slim for maneuverability Pocket clip and built-in blade snapper Preloaded with a 9 mm AB pre...

Snap-off blades Attached blade snapper Durability: Utility Blade Width: 9 mm Blade Material: Carbon Steel Handle Type: Plastic Blade Length: ...

Durable ABS plastic body Snap-off blades Attached blade snapper Lightweight design Durability: Utility Blade Width: 18 mm Blade Material: Carbo...

Designed for use in general lubrication and daily maintenance work Capacity: 14 oz (400 g) grease cartridge or suction fill Complete with 6" steel...

Corrosion and chemical resistant all-metal body Ultra-slim for maneuverability Stainless steel blade channel and handle Pocket clip and blade snap...

Bi-material handle guard For cutting brick and masonry Width of Cut: 3" Overall Length: 8-1/2" Manufacturer Part Number: 16-327

Manufacturer Part Number: TPL-2HT550HBL

Length: 1/2" Crown: 3/8" Gauge: 16 Finish: Plain Qty/Pkg.: 500 Sold/Priced Per: Package For Use With: Arrow T50P, T55, ETFX51, HTX50 & ...

Length: 6 mm Crown: 1/4" Gauge: 16 Finish: Plain Manufacturer Part Number: 50424SP

Length: 8 mm Crown: 5/16" Gauge: 16 Finish: Plain Manufacturer Part Number: 50524SP

Length: 10 mm Crown: 3/8" Gauge: 16 Finish: Plain Manufacturer Part Number: 50624SP

Length: 12 mm Crown: 1/2" Gauge: 16 Finish: Plain Manufacturer Part Number: 50824SP

Length: 14 mm Crown: 9/16" Gauge: 16 Finish: Plain Manufacturer Part Number: 50924SP

For use with staple gun Length: 10 mm Crown: 3/8" Gauge: 16 Finish: Plain Manufacturer Part Number: 256 Crown Type: Round

Pack of 100 Length: 1-1/2" Finish: Plain Manufacturer Part Number: BN1824CS Type: NAILS FOR ARROW NAIL GUNS Diameter: 1.2 mm Shank Type: Smooth

Pack of 1000 For use with staple gun Length: 11 mm Crown: 7/16" Gauge: 16 Finish: Plain Manufacturer Part Number: 257 Crown Type: Round

Pack of 1000 For use with staple gun Length: 14 mm Crown: 9/16" Gauge: 16 Finish: Plain Manufacturer Part Number: 259 Crown Type: Round

Pack of 500 Crown: 3/8" Gauge: 0.3125 Finish: Plain Qty/Pkg.: 500 Sold/Priced Per: Package For Use With: Arrow T50P, T55, ETFX51, HTX50 &...

Made of high quality Chrome Vanadium steel (except slip joint) Cutting edges induction hardened to HRC58-62 Double-dipped cushion grip handles off...