Products

10 Pcs.| Slotted: 3/64" x 1 1/2", 1/16" x 1 1/2", 5/64" x 1 1/2", 3/32" x 1 1/2"; Phillips: #000 x 1 1/2", #00 x 1 1/2", #0 x 1 1/2"; Torx®: T6 x 1...

Manufacturer Part Number: 88

Perfect for holding files, reamers, hacksaw blades and other tools with uncomfortable tang (shank) handles Features steel parallel clamping jaws &...

Graduations: 180° Blade Length: 6" Manufacturer Part Number: 17 Material: Stainless Steel Length of adjustable protractor arm: 6 in. Head dim...

Graduations: 180° Blade Length: 6" Manufacturer Part Number: 18 Material: Stainless Steel Length of adjustable protractor arm: 6 in. Head dim...

One-handed spring impact operation, no hammer needed Spring tension adjusts for light or heavy strokes and marking Lightweight aluminum body with ...

Ultra-fine, strong beveled tip Ideal for jewelers, watchmakers and electronics assembly/repair Overall Length: 5" Style: Fine Material: Stainle...

Includes: (1) Vinyl case Ground points for maximum strength and penetration Knurled bodies No. of Pieces: 5 Manufacturer Part Number: SPC74 Tip ...

Countersunk end ensures starting hole is centered in hardware screw hole Hardened steel pin Point Diameter: 3/8" Stock Size: 3/8" Overall Lengt...

Rose-pattern bit Features stepped shank Material: High Speed Steel Head Diameter: 1/2" Countersink Angle: 82° No. of Flutes: 5 Manufacturer Pa...

Features a swivel head & two interchangeable blades To remove leftover burrs from cut pipe, tubing, conduit and PVC tubing Manufacturer Part N...

Digital Protractor 1702 6" stainless steel protractor arm with knuckled locking nut Absolute and relative measurements Large, easy-to-read display...

8" stainless steel blade Holds and transfers angles between work pieces Auto shut-off feature with full LCD display 0.3° accuracy Range 0° - 360° ...

Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Point Diameter: 5/32" Overall Length: 4" Manufactur...

Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Point Diameter: 1/8" Overall Length: 8" Manufacture...

Made of hardened, tempered and heat-treated tool steel Ground square end Knurled finger grip Point Diameter: 3/16" Overall Length: 8" Manufactur...

Includes: (1) Vinyl case Made of hardened, tempered and heat-treated tool steel Ground square ends No. of Pieces: 5 Manufacturer Part Number: SPC...

Ultra-fine black graduations Polished stainless steel finish Length: 6" Width: 3/4" Material: Steel Manufacturer Part Number: 311ME

Ultra-fine black graduations Polished stainless steel finish Features a pocket clip Length: 6" Width: 15/32" Material: Steel Manufacturer Part ...

Ultra-fine black graduations Polished stainless steel finish Length: 6-1/2" Width: 15/32" Material: Steel Manufacturer Part Number: 305ME

Each leaf is etched with a size number measured in thousandths of an inch, as well as its millimeter equivalent Knurled lock nut holds leaves in d...

Hardened steel needle points are fixed to knurled body One straight point and one 90° bent point 8 7/16" long Overall Length: 8-7/16" Tip Materi...

Pack of 24 Finish: Brass Inside Diameter: 3/8" Outside Diameter: 13/16" Manufacturer Part Number: 1261-2

Point Diameter: 2/25" Overall Length: 6" Manufacturer Part Number: 78 Material: Steel

For 1/16" to 1/2" fractional size bits Made of heat-treated heavy gauge steel, machined and ground to close tolerances Etched graduations are fill...

Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet meta...

Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet meta...

Side hole for removing punched material Ideal for punching round holes in gasket material, leather, rubber, canvas, cardboard, plastic, sheet meta...

Includes: (1) Plastic roll pouch Made of forged steel Side hole for removing punched material No. of Pieces: 6 Manufacturer Part Number: 1280ST ...

Ultra-fine black graduations Polished stainless steel finish Length: 12" Width: 15/32" Graduation Style: 5R Graduations: Metric/Imperial Mate...

Ultra-fine black graduations Polished stainless steel finish Length: 6" Width: 15/32" Graduation Style: 5R Graduations: Imperial Material: St...

Includes: (1) Plastic sleeve, (1) Pocket clip Ultra-fine black graduations Polished stainless steel finish Length: 6" Width: 3-7/8" Material: S...

Ultra-fine black graduations Polished stainless steel finish Length: 6" Width: 3/4" Graduation Style: 4R Graduations: Imperial Material: Stee...

Ideal for jewelers, watchmakers and electronics assembly/repair Overall Length: 6" Style: Serrated Material: Stainless Steel Manufacturer Part ...

Ideal for jewelers, watchmakers and electronics assembly/repair Overall Length: 4-1/2" Style: Fine Material: Stainless Steel Manufacturer Part ...

2" x 3 3/4" rectangular steel mirror Telescoping handle: 10 3/4" extends to 26" Facilitates inspection of inaccessible work pieces and machines M...

Facilitate inspection of inaccessible work pieces and machines by toolmakers, assemblers, inspectors and mechanics Fully polished mirrors are encl...

One-hand spring impact operation, no hammer needed Lightweight aluminum body with long wearing alloy steel parts Spring tension adjusts for light ...

Powered by Neodymium magnet Chrome-plated steel arm extends from 13" to 27" (330 mm to 685 mm) Features dual ball-and-socket joint with lock &...

Manufacturer Part Number: 383NX

One-handed spring impact operation, no hammer needed Spring tension adjusts for light or heavy strokes and marking Point Diameter: 11/200" Stock...

Slotted: 3/64" x 1 1/2", 1/16" x 1 1/2", 5/64" x 1 1/2", 3/32" x 1 1/2"; Phillips: #000 x 1 1/2", #00 x 1 1/2", #0 x 1 1/2"; Torx®: T6 x 1 1/2", T...

Readings: Analogue Manufacturer Part Number: 16ME Material: Stainless Steel Graduations: 1/64" (1 mm) Length: 4"

Includes: (1) Warding file, (1) Round file, (1) Three square, (1) Aluminum handle No. of Files: 4 Manufacturer Part Number: S477 File Length: 5-...

Measures inside, outside and slope angles Four piece sturdy design with brass lock nut Fine black graduations from 0° to 180° in opposite directio...

Features pocket clip for handy storage & rustproof knurled aluminum body Powered by Neodymium magnet Great for retrieving small steel and iron...

Set includes: 1 Versa-Grip multi-blade handle, 17 interchangeable blades: Slotted 3/64", 1/16", 5/64", 3/32", Phillips #000, #00, Torx® T6, T7, T8...

Includes: (9) Punches, (1) Driving mandrel, (1) Custom plastic case All punches are made of hardened and tempered alloy steel Heavy-duty, spring l...