Products

Adjusts to the fit virtually any hand-held radio, cell phone and many other portable devices Includes a micro D-ring that can be placed on the dev...

Corrosion resistant zinc plated hardware Self-closing and locking gate for added safety Capacity (lbs.): 420 lbs. Material: Steel Manufacturer P...

Self-locking 3/4" gate opening Meets OSHA 1926 and ANSI SZ359 standards Zinc plated, 3600-lb. anchorage point Easy one-hand operation Capacity (l...

Installs easily and quickly overhead with no tools necessary at ends or midpoint on beams Non-corrosive double-shielded wheel bearings provide smo...

Features a locking carabiner with screw locks that prevent accidental opens Versatile bungee design reduces trip and entanglement hazards while re...

6 ft. (1.8m) pass-thru type tie-off adaptor Durable 3/8" (9.5mm) 7x19 stainless steel cable construction High-strength steel O-ring hardware Compa...

Built from non-conductive, lightweight vinyl that is easy to clean and withstands harsh work environments Ultra-compact coil design naturally stay...

Built from non-conductive, lightweight vinyl that is easy to clean and withstands harsh work environments Ultra-compact coil design naturally stay...

Concrete strap anchor with D-Ring and web loop, 42" Type: Temporary Style: Concrete/D-Ring Manufacturer Part Number: 2100050 Rated capacity: 31...

Installs into 11/16 in., 18 mm or 3/4 in. concrete hole Use vertically in wall or horizontally in ceiling Install as temporary or permanent anchor...

Reusable D-ring assembly Install into 11/16" or 3/4" holes - only standard drill bits needed Rugged design for harsh environments Safe "hook-up" i...

Works with a variety of advanced davit arm and mast extensions Fixed bases are ideal for work areas where frequent set-up and tear-down is require...

Bolt or weld to structure for fall arrest anchor point Pre-drilled 1/2" (12.7mm) holes Zinc plated steel D-ring for compatible tie-off point High ...

Two 1/2" diameter attachment holes Cadmium plated steel D-ring 304 stainless steel anchorage plate Plate size: 1/4" x 2" x 4 1/2" Can be bolted or...

D-Rings can be attached to virtually any tool under their load rating using Quick Wrap Tape Creates an instant attachment point in less than a min...

D-Rings can be attached to virtually any tool under their load rating using Quick Wrap Tape Creates an instant attachment point in less than a min...

Loop the D-Ring cord through a pre-drilled hole or closed handle to create an instant attachment point Long lasting construction will stand up to ...

Durable 3/8" (9.5mm) 7x19 stainless steel cable construction High-strength steel o-ring hardware Compact and lightweight design 4 ft. (1.2m) pass-...

Bolt or weld to structure for fall arrest anchor point Compact 1/4" x 2" x 4-1/2" (6 x 51 x 114 mm) 304 stainless steel plate Pre-drilled 1/2" (12...

Extends dorsal harness D-ring (or overhead anchor point) Abrasion-resistant polyester webbing Built-in wear indicator Part: Other Manufacturer Pa...

Installs up to a 2"x 8" wood frame structure Fast and easy bolt and clamp installation Permanent installation type Integral stainless steel D-ring...

Installs to sloped or flat wood and metal decking roofs Fast and easy nail or screw installation - Fastener kit included Hinged design with D-ring...

Emergency rescue and evacuation from a wide variety of elevated work areas Fully-automatic controlled descent for sloped applications Bidirectiona...

Installs to 24-gauge or thicker metal, 5/8" (1.6cm) wood and 3,000 PSI (21 MPa) concrete roofs Accommodates roof ribs 10-20 in. (25.4-50.1cm) apar...

Type: Temporary, I-Beam| Versatile size ranges to fit a variety of beams Replaceable wear pads 360-degree swiveling D-ring anchor point Integrated ...

10 ft. (3.0m) pass-thru type tie-off adaptor Durable polyester construction Abrasion-resistant polyester wear pad High-strength steel hardware Ty...

Shoulder and back pad for harness Provides added comfort Velcro attachment to harnesses Heavy-duty nylon with soft Lycra® and foam Non-slip design...

No-tangle design Repel™ webbing Built-in lanyard keepers Revolver™ vertical torso adjusters Impact Indicator Protected labels, equipped with i-Saf...

Patented triangular no-tangle design creates a frame that allows the harness to fall into place when donned Repel(TM) webbing is water repellent t...

Patented triangular no-tangle design creates a frame that allows the harness to fall into place when donned Repel ™ webbing is water repellent to ...

Patented triangular no-tangle design creates a frame that allows the harness to fall into place when donned Repel ™ webbing is water repellent to ...

Patented triangular no-tangle design creates a frame that allows the harness to fall into place when donned Repel ™ webbing is water repellent to ...

Patented triangular no-tangle design creates a frame that allows the harness to fall into place when donned Repel ™ webbing is water repellent to ...

Patented triangular no-tangle design creates a frame that allows the harness to fall into place when donned Repel ™ webbing is water repellent to ...

Patented triangular no-tangle design creates a frame that allows the harness to fall into place when donned Repel ™ webbing is water repellent to ...

Patented triangular no-tangle design creates a frame that allows the harness to fall into place when donned Repel ™ webbing is water repellent to ...

Patented triangular no-tangle design creates a frame that allows the harness to fall into place when donned Repel ™ webbing is water repellent to ...

No-tangle design Stand-up back D-ring Front D-ring Tech-Lite ™ quick connect buckle leg straps Repel ™ webbing Built-in lanyard keepers Revolver ™...

No-tangle design Stand-up back D-ring Repel™ webbing Built-in lanyard keepers Revolver™ vertical torso adjusters Impact Indicator Protected labels...

No-tangle design Tech-Lite™ quick-connect buckle leg straps Repel™ webbing Built-in lanyard keepers Revolver™ vertical torso adjusters Impact Indi...

No-tangle design Stand-up back D-ring Pass-thru buckle leg straps Repel ™ webbing Built-in lanyard keepers Revolver ™ vertical torso adjusters Imp...

No-tangle design Tech-Lite™ quick-connect buckle leg straps Repel™ webbing Built-in lanyard keepers Revolver™ vertical torso adjusters Impact Indi...

No-tangle design Stand-up back D-ring Tech-Lite™ quick connect buckle leg straps Repel™ webbing Built-in lanyard keepers Revolver™ vertical torso ...

Type: Fall Arrest/Evacuation/Retrieval CSA Class: AE Weight Capacity: 420 lbs. D-Rings: Back - Shoulder Leg Strap Connections: Pass-Through/M...

Fits door or window sizes ranging from 21 1/2" to 51 1/2" in width Non-penetrating design ensures no damage to structure Fast and easy installatio...

Built-in web carrying handles Heavy-duty zipper Manufacturer Part Number: 9511597 Dimensions: 7.5" x 6.5" x 15.5" (19.1 x 16.5 x 39.4 cm)

Medium size 10.5 in. x 12 in. x 19.5 in. (26.7 x 30.5 x 49.5 cm) Built-in web carrying handles Heavy-duty zipper Durable nylon construction Compac...

Built-in web carrying handles Heavy-duty zipper Durable nylon construction with PVC lining Removable shoulder strap Compact and lightweight design...