We ship Canada-wide
Outils manuels
Filtres
- Aluminum File (0)
- Ball Pein Hammer (0)
- Band File (0)
- Brick Hammer (0)
- Carpenter Claw Hammer (0)
- Chain Saw File (0)
- Chipping Hammer (0)
- Chisel Set (0)
- Club Hammer (0)
- Cold Chisel (0)
- Cordless Hammer Driver (0)
- Cordless Rotary Hammer (0)
- Cordless Screwdriver (0)
- Crimping Pliers (0)
- Cross Point Screwdriver (3)
- Dead Blow Hammer (0)
- Demolition Claw Hammer (0)
- Desktop File/Tray (0)
- Diagonal Cutting Pliers (0)
- End Cutting Pliers (0)
- Farmer's File (0)
- Fence Pliers (0)
- File Card With Brush (0)
- File Cart (0)
- File Folders (0)
- File Handle (0)
- File Set (0)
- File Storage Drawer (0)
- Flat File (0)
- Groove Joint Pliers (0)
- Half Round File (0)
- Hammer Drill (0)
- Hammer Handle (0)
- Hammer Set (0)
- Hammer Stapler (0)
- Hammer Tip (0)
- Hand File (0)
- Handy File (0)
- Hex Point Screwdriver (0)
- Insulated Pliers (0)
- Insulated Screwdriver (3)
- Jeweller's Screwdriver (0)
- Lathe File (0)
- Linesman Pliers (0)
- Locking Pliers (0)
- Long Nose Pliers (0)
- Low Profile Pallet Truck (0)
- Low Profile Shop Cart (0)
- Masonry Chisel (0)
- Mill File (0)
- Multi Purpose Pliers (0)
- Multibit Screwdriver (0)
- Needle Nose Pliers (0)
- Nutsetter & Screwdriver Bit Sets (0)
- Phillips Screwdrivers (0)
- Plan File Parts & Accessories (0)
- Plan File Storage (0)
- Plier Ground Clamp (0)
- Plier Parts & Accessories (0)
- Plier Set (0)
- Plier Stapler (0)
- Pneumatic Band File (0)
- Pneumatic Screwdriver (0)
- Pneumatic Utility Hammer (0)
- Power Chisel (0)
- Punch & Chisel Set (0)
- Roll File Storage (0)
- Round File (0)
- Scaling Chisel (0)
- Screwdriver Insert Bit (3)
- Screwdriver Power Bit (0)
- Screwdriver Set (5)
- Seaming Pliers (0)
- Side Cut Rebar Pliers (0)
- Sledge Hammer (0)
- Slip Joint Pliers (0)
- Slot Cabinet Tip Screwdrivers (7)
- Slot Keystone Screwdrivers (6)
- Soft Face Hammer (0)
- Specialty Pliers (0)
- Specialty Screwdriver (0)
- Square Drive Screwdriver (3)
- Square File (0)
- Tamper Proof Screwdriver (4)
- Taper File (0)
- Thread Restoring File (0)
- Three Square File (0)
- Torque Screwdriver (0)
- Torx® Screwdriver (7)
- Wall File Holder (0)
- Warding File (0)
- Wedge For Hammer Handle (0)
- Welding Pliers (0)
- Wire Stripping Pliers (0)
- Woodworking Hand Chisel (0)
- Apex (113)
- ARROW (2)
- Arrow (2)
- Aurora Tools (50)
- AURORA TOOLS (14)
- Bondhus (12)
- Brady (1)
- CHANNELOCK (2)
- Channelock (1)
- CHICAGO PNEUMATIC (2)
- Chicago Pneumatic (2)
- Crescent (4)
- CRESCENT (2)
- DEWALT (6)
- Dewalt (6)
- DYNABRADE (5)
- Dynabrade (1)
- DYNAMIC (9)
- Dynamic Tools (17)
- DYNAMIC TOOLS (1)
- ESSELTE (4)
- FELLOWES (1)
- Garant (8)
- GARANT (7)
- Gearwrench (10)
- GEARWRENCH (5)
- General Tools (5)
- Gerber (2)
- GERBER (1)
- GRIP-ON (1)
- Ingersoll Rand (2)
- IRWIN (43)
- Irwin (13)
- ITC (1)
- JET (15)
- JET EQUIPMENT (32)
- Klein Tools (67)
- KLEIN TOOLS (34)
- Kleton (6)
- Lenco (4)
- LIND EQUIPMENT (1)
- Lind Equipment (1)
- MAKITA (2)
- Makita (1)
- Megapro (5)
- MILWAUKEE (52)
- Milwaukee (39)
- NICHOLSON BY CRESCENT (66)
- Nicholson By Crescent (56)
- OETIKER INC (2)
- Osborn (1)
- Paulin (1)
- PICQUIC (15)
- Picquic (13)
- Safco (17)
- SAFCO (11)
- shopSafety (2)
- SHUR-FAST (1)
- STANLEY BOSTITCH (2)
- Stanley Bostitch (2)
- STANLEY TOOLS (10)
- Stanley Tools (9)
- STOREX (1)
- The Harris Products Group (1)
- UTICA (4)
- Weld-Mate (3)
- Wera Tools (51)
- WERA TOOLS (41)
- Wilton (1)
- Wiss By Crescent (2)
- 1-1/2" (0)
- 1-7/8" (0)
- 3-5/8" (0)
- 3.5" (0)
- 4" (0)
- 4-1/8" (0)
- 4.25" (0)
- 5" (0)
- 5-1/2" (0)
- 6" (0)
- 6-1/2" (0)
- 6.25" (0)
- 6.5" (0)
- 7" (0)
- 7-1/2" (0)
- 8" (0)
- 10" (0)
- 12" (0)
- 14" (0)
- 15.5" (0)
- 16" (0)
- 25.75" (0)
- 36" (0)
- 70 mm (0)
- 10 3/4" (273 mm) (0)
- 14 1/4" (362 mm) (0)
- 14 3/5" (371 mm) (0)
- 19" (445 mm) (0)
- 216-312 in-lbs. (0)
Slotted Phillips Screwdriver Set
WERA TOOLSScrewdriver for slotted and cross-recess screws Multi-component Kraftform handle for fast and ergonomic screwdriving Colour coding according to pr...
Afficher tous les détailsTorx Screwdriver
WERA TOOLSMulti-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature Colour coding according to profile and size Tip ...
Afficher tous les détailsSlotted Screwdriver
WERA TOOLSSmooth hard zones for high-speed turning Soft grip zones for high torque transfer Colour coding according to profile and size Chrome-plated Tip S...
Afficher tous les détailsTapered Slotted Screwdriver
WERA TOOLSMulti-component Kraftform handle for fast and ergonomic screwdriving Colour coding according to profile and size Hexagonal anti-roll feature Laser...
Afficher tous les détailsSlotted Demolition Screwdriver
WERA TOOLSChisel driver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and e...
Afficher tous les détailsSlotted Demolition Screwdriver
WERA TOOLSChisel driver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and e...
Afficher tous les détailsSlotted Demolition Screwdriver
WERA TOOLSChisel driver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and e...
Afficher tous les détailsSlotted Demolition Screwdriver
WERA TOOLSChisel driver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and e...
Afficher tous les détailsSlotted Demolition Screwdriver
WERA TOOLSChisel driver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and e...
Afficher tous les détailsSlotted insulated 5.5 mm
WERA TOOLSVoltage Rating: 1000 V Overall Length: 8-25/32" Tip Style: Slot Tip Size: 5.5 mm Manufacturer Part Number: 5006120001 Handle Type: Plastic S...
Afficher tous les détailsSlotted insulated 4.0 mm
WERA TOOLSVoltage Rating: 1000 V Overall Length: 7-25/32" Tip Style: Slot Tip Size: 4 mm Manufacturer Part Number: 5006115001 Handle Type: Plastic Sha...
Afficher tous les détailsSquare Plus # 2
WERA TOOLSTip Size: #2 Shank Length: 8" Shank Type: Round Handle Type: Plastic Overall Length: 12" Manufacturer Part Number: 5117685001
Square Plus # 2
WERA TOOLSTip Size: #2 Shank Length: 4" Shank Type: Round Handle Type: Plastic Overall Length: 8-1/16" Manufacturer Part Number: 5117684001
Tamper Proof Torx Screwdriver
WERA TOOLSType: Torx® Tip Size: T-25 Manufacturer Part Number: 05138263001
Tamper-Proof Torx Screwdriver
WERA TOOLSMulti-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature Colour coding according to profile and size Type...
Afficher tous les détailsTamper Proof Torx Screwdriver
WERA TOOLSType: Square Torx® Tip Size: T-15 Manufacturer Part Number: 05138261001
Wera Torx Insulated Screwdriver
WERA TOOLSSecurity tamperproof Torx® drivers for use on Torx® screws. Ergonomically shaped handles with integrally molded soft plastic inserts Allows for be...
Afficher tous les détailsTorx Screwdriver
WERA TOOLSMulti-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature Colour coding according to profile and size Tip ...
Afficher tous les détailsTorx Screwdriver
WERA TOOLSMulti-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature Colour coding according to profile and size Tip ...
Afficher tous les détailsTorx Screwdriver
WERA TOOLSMulti-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature Colour coding according to profile and size Tip ...
Afficher tous les détailsTorx Screwdriver
WERA TOOLSMulti-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature Colour coding according to profile and size Tip ...
Afficher tous les détailsSlotted Screwdriver
WERA TOOLSMulti-component Kraftform handle for fast and ergonomic screwdriving Hexagonal anti-roll feature Tip Size: 1/8" Shank Length: 3-1/8" Shank Type...
Afficher tous les détailsKraftform Kompakt Imperial Screwdriver Bit Set
WERA TOOLSStainless Steel Series Light Blue Handle No. of Pieces: 17 Pcs. Magnetic/Non Magnetic: Non Magnetic Manufacturer Part Number: 5071117001

Tournevis Torx
WERA TOOLSTaille : T-20, 4", Type : Rond, Type : Plastique, 8" | Manche Kraftform multi-composants pour un vissage rapide et ergonomique Fonction anti-roul...
Afficher tous les détails
Tournevis Torx
WERA TOOLSTaille : T-15, 3-1/4", Type : Rond, Type : Plastique, 6-3/8" | Manche Kraftform multi-composants pour un vissage rapide et ergonomique Fonction ...
Afficher tous les détails
Embout d'insertion de tournevis Torx
WERA TOOLSTorx, taille : 1/4", taille : T-5, 1" | Permet un transfert de couple élevé et est très durable Convient aux porte-embouts DIN 3126-D 6.3, ISO 11...
Afficher tous les détails
Mors carré Robertson
WERA TOOLSCarré, Taille : 1/4", Taille : 2, 50 mm| Convient aux vis à six pans creux Ductile et tenace pour les matériaux durs Codage couleur selon profil...
Afficher tous les détails
Mèche à insérer carrée Robertson
WERA TOOLSCarré, Taille : 1/4", Taille : 2, 152 mm | Convient aux vis à six pans creux Ductile et tenace pour les matériaux durs Empêche la rupture prémat...
Afficher tous les détails

Jeu de tournevis Torx
WERA TOOLS6 pièces, non magnétique | Tournevis pour vis TORX® Manche Kraftform multi-composants pour un vissage rapide et ergonomique Codage couleur selon...
Afficher tous les détails

Jeu de tournevis série Micro 12 pièces
WERA TOOLS12 pièces, non magnétique | PH-TX-SL-Hex Manche Vert / Noir Nombre de pièces : 12 pièces. Magnétique/Non Magnétique : Non Magnétique Numér...
Afficher tous les détails
Jeu de tournevis Kraftform XXL 3 12 pièces
WERA TOOLS11 pièces, non magnétique | 100-300-900- ensemble série Mix Mélange 7 fentes -2 PH - 2 Square 12 pièces avec grilles Nombre de pièces : 11 p...
Afficher tous les détails
Carré Plus # 3
WERA TOOLSTaille : #3, 6", type : rond, type : plastique, 10-5/16" | Taille de la pointe : #3 Longueur de tige : 6" Type de tige : Ronde Type de ...
Afficher tous les détails

Tournevis cruciforme n° 2
WERA TOOLSTaille : n° 2, 20,3 cm, type : rond, type : plastique, 30,5 cm | Taille de la pointe : #2 Longueur de tige : 8" Type de tige : Ronde Ty...
Afficher tous les détails

Tournevis cruciforme n° 2
WERA TOOLSTaille : #2, 4", type : rond, type : plastique, 8-1/16" | Taille de la pointe : #2 Longueur de tige : 4" Type de tige : Ronde Type de ...
Afficher tous les détails

Tournevis cruciforme n° 1
WERA TOOLSTaille : #1, 8", type : rond, type : plastique, 11-23/32" | Taille de la pointe : #1 Longueur de tige : 8" Type de tige : Ronde Type de...
Afficher tous les détails
Tournevis à fente
WERA TOOLSTaille : 1/4", 8", Type : Rond, Type : Plastique, 12" | Manche Kraftform multi-composants pour un vissage rapide et ergonomique Fonction anti-rou...
Afficher tous les détails
Tournevis à fente
WERA TOOLSTaille : 3,5 mm, 8", type : rond, type : plastique, 11-1/16" | Taille de la pointe : 3,5 mm Longueur de tige : 8" Type de tige : Ronde ...
Afficher tous les détails
Tournevis à fente
WERA TOOLSTaille : 3,5 mm, 5", Type : Rond, Type : Plastique, 8-1/8" | Taille de la pointe : 3,5 mm Longueur de tige : 5" Type de tige : Ronde Ty...
Afficher tous les détails
Tournevis à fente
WERA TOOLSTaille : 3,5 mm, 4", Type : Rond, Type : Plastique, 7-1/8" | Zones dures lisses pour un tournage à grande vitesse Zones de préhension souples pou...
Afficher tous les détails
Tournevis à fente
WERA TOOLSTaille : 3/32", 3", Type : Rond, Type : Plastique, 5-11/16" | Zones dures lisses pour un tournage à grande vitesse Zones de préhension souples po...
Afficher tous les détails
Fendue isolée 3,0 mm
WERA TOOLS1000 V, 7-1/8", Fente, Taille : 3 mm, Type : Plastique, Plastique, Type : Rond, Rond| Tension nominale : 1000 V Longueur totale : 7-1/8" S...
Afficher tous les détails