We ship Canada-wide
STARRETT
Filters
- Band Saw Blade (5)
- Centre Punch (4)
- Circular Level (0)
- Combination Square (1)
- Combination Square Set (1)
- Digital Caliper (2)
- Digital Micrometer (1)
- Drill Gauge (0)
- Drive Pin Punch (13)
- Edge Finder (2)
- Feeler Gauge (1)
- Hacksaw (0)
- Hacksaw Blade (5)
- Hole Saw (0)
- Hole Saw Arbor (0)
- Hole Saw Set (0)
- Jigsaw Blade (11)
- Key Reels (0)
- Machinist's Level (0)
- Magnetic Base (0)
- Manual Caliper (3)
- Manual Thickness Gauge (6)
- Nail Set Punch (1)
- Pin Vise (0)
- Plumb Bob (1)
- Power Hacksaw Blade (6)
- Prick Punch (0)
- Protractor (1)
- Punch Set (4)
- Rafter Square (0)
- Reciprocating Saw Blade (9)
- Retractable Knife (0)
- Ruler (11)
- Specialized Cleaner (1)
- Steel Feeler Gauge Stock (21)
- Tape Measure (7)
- Taper Gauge (1)
- Telescoping Gauge (1)
- Thread Gauge (0)
- Tool Belt Pouch (1)
- 2" (2)
- 3" (4)
- 4" (6)
- 6" (8)
- 8" (1)
- 9" (1)
- 12" (4)
- 14" (3)
- 17" (1)
- 18" (1)
- 21" (0)
- 24" (1)
- 36" (2)
- 44-7/8" (3)
- 64-1/2" (0)
- 93" (0)
- 130-1/2" (0)
- 150" (0)
- 154-1/2" (1)
- 159" (0)
- 162" (0)
- 11' (0)
- 25' (8)
- 100 mm (0)
- 12" (300 mm) (5)
- 5' 4-1/2" (0)
- 7' 9" (0)
- Set of 5, in plastic case" (0)
- Set of 5 punches (1 of each size) in plain box" (1)
Fastcut™ General Purpose Reciprocating Blades, Pack of 50
STARRETTPack of 50 Length: 12" Width: 3/4" Thickness: 0.05" TPI: 10-14 Material: Bi-Metal Manufacturer Part Number: 15705
Fibreglass Measuring Tape
STARRETTRed ABS plastic & ergonomic design provides durability and comfort Positive sliding lock holds tape securely while transferring measurement to...
View full detailsGranite Cleaner, Box of 4
STARRETTBox of 4 Engineered specifically for use on granite surface plates and accessories Helps prevent abrasion caused by dirt and other foreign particl...
View full detailsMagnetic Measuring Tape
STARRETTRed ABS plastic & ergonomic design provides durability and comfort Positive sliding lock holds tape securely while transferring measurement to...
View full detailsPower Hacksaws Blades Redstripe® High Speed Steel
STARRETT12", 1", 0.5", 10| Length: 12" Width: 1" Thickness: 0.5" TPI: 10 Manufacturer Part Number: 40046 Specifications Pinhole Dia. Inch 0.334 Pinh...
View full detailsPower Hacksaws Blades Redstripe® High Speed Steel
STARRETT12", 1", 0.5", 14| Length: 12" Width: 1" Thickness: 0.5" TPI: 14 Manufacturer Part Number: 40047 Specifications Pinhole Dia. Inch 0.334 Pinh...
View full detailsPower Hacksaws Blades Redstripe® High Speed Steel
STARRETT14", 1", 0.5", 10| Length: 14" Width: 1" Thickness: 0.5" TPI: 10 Manufacturer Part Number: RS1410-5 Specifications Pinhole Dia. Inch 0.334 P...
View full detailsPower Hacksaws Blades Redstripe® High Speed Steel
STARRETT14", 1", 0.5", 14| Length: 14" Width: 1" Thickness: 0.5" TPI: 14 Manufacturer Part Number: 40050 Specifications Pinhole Dia. Inch 0.334 Pinh...
View full detailsPower Hacksaws Blades Redstripe® High Speed Steel
STARRETT14", 1-1/4", 0.62", 10| Length: 14" Width: 1-1/4" Thickness: 0.62" TPI: 10 Manufacturer Part Number: RS1410-6 Specifications Pinhole Dia. Inch...
View full detailsPower Hacksaws Blades Redstripe® High Speed Steel
STARRETT17", 1-1/4", 0.62", 10| Length: 17" Width: 1-1/4" Thickness: 0.62" TPI: 10 Manufacturer Part Number: 40063 Specifications Pinhole Dia. Inch 0....
View full detailsSingle End Edge Finder
STARRETTTool steel hardened, ground, and lapped to close tolerances for diameter and concentricity Includes protective case Manufacturer Part Number: 827A...
View full detailsSolid Brass Plumb Bobs
STARRETTEasy, self-centering line assembly with screw cap design Points easily replaced if worn or broken Conforms to U.S. Government Specifications GGG-P...
View full detailsSquare-Head Nail Set Punch
STARRETTRound, knurled grip Large, square head Will not roll Beveled end to prevent breakage Punch surface is cupped to follow the nail without sliding of...
View full detailsSteel Protractors
STARRETTDouble graduations from 0-180° in opposite directions permitting the direct reading of angles and supplementary angles The back of the tool is fla...
View full detailsSteel Rules
STARRETT6", 1/2", No. 4R - 8ths, 16ths, Quick-Reading 32nds and 64ths, Material: Steel| Machine-divided (not photoengraved) rules provide uniformity of lin...
View full detailsSteel Rules
STARRETT6", 3/4", 1/64", Material: Steel| Machine-divided (not photoengraved) rules provide uniformity of line width and depth Inspected to Starrett® Maste...
View full detailsSteel Straight Edges
STARRETT12", 1-13/32", 1/16", Material: Steel| Precision ground and nicely finished for drawing or scribing straight lines and checking surfaces for straig...
View full detailsSteel Straight Edges
STARRETT18", 1-13/32", None, Material: Steel| Precision ground and nicely finished for drawing or scribing straight lines and checking surfaces for straigh...
View full detailsSteel Straight Edges
STARRETT36", 2-13/32", None, Material: Steel| Precision ground and nicely finished for drawing or scribing straight lines and checking surfaces for straigh...
View full detailsStraight Edge Rule
STARRETTPrecision ground and nicely finished for drawing or scribing straight lines and checking surfaces for straightness. Length: 36" Width: 2-13/32" ...
View full detailsStraight Edge Rule
STARRETTPrecision ground and nicely finished for drawing or scribing straight lines and checking surfaces for straightness. Length: 24" Width: 1-13/32" ...
View full detailsStraight Edge Rule
STARRETTLength: 6" Width: 3/4" Material: Steel Manufacturer Part Number: 52645
Straight Edge Rule
STARRETTPrecision ground and nicely finished for drawing or scribing straight lines and checking surfaces for straightness. Length: 12" Width: 1-13/32" ...
View full detailsStraight Edge Rule
STARRETTPrecision ground and nicely finished for drawing or scribing straight lines and checking surfaces for straightness. Length: 18" Width: 1-13/32" ...
View full detailsStraight Edge Rule
STARRETTPrecision ground and nicely finished for drawing or scribing straight lines and checking surfaces for straightness. Length: 36" Width: 2-13/32" ...
View full detailsStudent Combination Squares
STARRETTA rugged, cast iron square head that will outlast cheap plastic and die-cast imitations An accurate, hardened and tempered square blade offered in...
View full detailsTaper Gauges
STARRETTTaper Gauge For bearing work and for gaging slots Made of quality tool steel; HU391 Taper Gauge: Top view is front side with inch measurement. Mid...
View full detailsTelescoping Gauges
STARRETTSet of 6, Models HV072, HV073, HV074, HV075, HV076, HV077 in case SETS SELF-CENTERING WITH TWO TELESCOPING ARMS; 5/16-6" (8-150 mm); Handles are r...
View full detailsThickness Gauges
STARRETT(Range) Leaf Thickness": 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, ...
View full detailsThickness Gauges
STARRETT(Range) Leaf Thickness": 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, ...
View full detailsThickness Gauges
STARRETT(Range) Leaf Thickness": 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70,0.75, 0.80, 0.85, 0.90, 0.95, 1.0 MILL...
View full detailsThickness Gauges
STARRETT(Range) Leaf Thickness": 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013,.014, 0.015, 0.016, 0....
View full detailsThickness Gauges
STARRETT(Range) Leaf Thickness": 0.0015, 0.002, 0.0025, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013,.014, 0.015, 0.016, 0....
View full detailsThickness Gauges or "Feeler" Stock
STARRETTINCH GAUGES - 12" LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimeter sizes a...
View full detailsThickness Gauges or "Feeler" Stock
STARRETTINCH GAUGES - 12" LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimeter sizes a...
View full detailsThickness Gauges or "Feeler" Stock
STARRETTINCH GAUGES - 12" LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimeter sizes a...
View full detailsThickness Gauges or "Feeler" Stock
STARRETTINCH GAUGES - 12" LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimeter sizes a...
View full detailsThickness Gauges or "Feeler" Stock
STARRETTINCH GAUGES - 12" LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimeter sizes a...
View full detailsThickness Gauges or "Feeler" Stock
STARRETTINCH GAUGES - 12" LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimeter sizes a...
View full detailsThickness Gauges or "Feeler" Stock
STARRETTINCH GAUGES - 12" LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimeter sizes a...
View full detailsThickness Gauges or "Feeler" Stock
STARRETTINCH GAUGES - 12" LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimeter sizes a...
View full detailsThickness Gauges or "Feeler" Stock
STARRETTINCH GAUGES - 12" LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimeter sizes a...
View full detailsThickness Gauges or "Feeler" Stock
STARRETTINCH GAUGES - 12" LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimeter sizes a...
View full detailsThickness Gauges or "Feeler" Stock
STARRETTINCH GAUGES - 12" LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimeter sizes a...
View full detailsThickness Gauges or "Feeler" Stock
STARRETTMILLIMETER GAUGES - 300 MM LENGTHS Inch sizes are 12" long, 1/2" wide and furnished in 33 different thicknesses ranging from .0005-.030" Millimete...
View full detailsThickness Gauges or "Feeler" Stock In Rolls
STARRETTHandy 25' and 7.6 m rolls 1/2" and 12.7 mm wide, in a compact, sturdy plastic rewindable dispenser case INCH READING ROLLS - DISPENSER CASE Rewind...
View full detailsThickness Gauges or "Feeler" Stock In Rolls
STARRETTHandy 25' and 7.6 m rolls 1/2" and 12.7 mm wide, in a compact, sturdy plastic rewindable dispenser case INCH READING ROLLS - DISPENSER CASE Rewind...
View full detailsThickness Gauges or "Feeler" Stock In Rolls
STARRETTHandy 25' and 7.6 m rolls 1/2" and 12.7 mm wide, in a compact, sturdy plastic rewindable dispenser case INCH READING ROLLS - DISPENSER CASE Rewind...
View full details