Products

A self-leveling aluminum liquid that can be poured into molds and cavities Recommended for casting aluminum replacement parts and for making molds...

Two-part super fast bonding adhesive Excellent for bonding metals, ceramics, wood, concrete, and glass under typical dry temperatures Gel consiste...

Aggregate-filled, epoxy system for pours up to 6" deep For self-levelling applications under rails and sole plates Bonds to steel, concrete and it...

Excellent chemical resistance Fills porosities and can be used to build up worn parts For bonding glass, hard plastics, rubber and metal 180°F tem...

Excellent chemical resistance Fills porosities and can be used to build up worn parts For bonding glass, hard plastics, rubber and metal 180°F tem...

Bonds virtually any material to repair, fill and seal holes, cracks and worn surfaces 300°F temperature resistance 2300 psi adhesive tensile shear...

Trowelable For repairing and resurfacing cracks in concrete floors Bonds to old and new concrete and provides greater strength and chemical resist...

Trowelable For repairing and resurfacing cracks in concrete floors Bonds to old and new concrete and provides greater strength and chemical resist...

Two-component, rapid setting concrete repair and grouting system Chemically resistant to most common liquids and chemicals For concrete, wood, gla...

Two-component, rapid setting concrete repair and grouting system Chemically resistant to most common liquids and chemicals For concrete, wood, gla...

Rapid setting concrete repair and grouting system Bonds to concrete, wood, glass, steel and construction materials CFIA approved Two-component sys...

Pail A two-component, rapid-setting concrete repair and grouting system with same properties as the Magna-Crete ™ but containing smaller aggregate...

Steel filled Pourable and self-levelling Recommended for casting into hard to reach areas, anchoring and levelling and forming molds and fixtures ...

Non-rusting, ferro-silicone-filled epoxy Extremely high compressive strength and wear resistance Ideal for rebuilding worn surfaces exposed to har...

Two-component, room temperature curing epoxy adhesive used for high strength, permanent bonding of metals, ceramics, concrete, wood and most plast...

Faster setting version of the Loctite ™ Fixmaster ™ steel putty Sets in 3 minutes Accepted for use in Canadian food processing facilities Format:...

150 g., Type: Stick| Kneadable, two-part paste Working time: 3 minutes Sets in 10 minutes Adheres to damp surfaces Can be drilled, filed and painte...

Kneadable, two-part paste Working time: 3 minutes Sets in 10 minutes Adheres to damp surfaces Can be drilled, filed and painted Ideal for emergenc...

Forms a non-rusting, very hard, durable finish on damaged stainless steel surfaces 0.25 ft.2 coverage, at 1/4" thickness 225°F maximum operating t...

Steel filled, non-sagging, two-part epoxy that cures to a metal-like finish for rebuilding or repairing metal parts 0.3 ft.2 coverage, at 1/4" thi...

Patented BladeLock Technology keeps blade locked in place Liner lock for quick one-handed operation All-metal body design for added durability Wir...

Finish: Zinc Cr+3 Diameter: 1/2" Thread: Coarse Manufacturer Part Number: 857340

Temperature range to 400°F with excellent solvent and chemical resistance For hand dispensing or screen printing Resists low on-line test pressure...

Flexible gaskets for rigid machined flanges with less than 0.050" gap Flexes with flanges that move in service For flexible applications 0.010" un...

Flange Sealant seals close fitting joints between rigid metal faces and flanges Because it is fast curing, it provides resistance to low pressures...

Ideal for blending sharp corners, heavy deburring, and fillet welds Trimmable backing extends disc life High-performance flap disc optimized for u...

Ideal for blending sharp corners, heavy deburring, and fillet welds Trimmable backing extends disc life High-performance flap disc optimized for u...

Ideal for repair applications to remove defects without damage to adjacent areas Grit: 40 Diameter: 4-1/2" Arbor Size: 5/8"-11 Abrasive Materi...

Ideal for use on edges, chamfering and deburring applications Grit: 50 Diameter: 4-1/2" Arbor Size: 5/8"-11 Abrasive Material: Zirconia Alumin...

Alumina zirconia For aggressive stock removal on a variety of welds, coatings and other metal fabrication applications The overlapping coated abra...

Metal fabrication Blending welds Deburring Cleaning and finishing; Conformable to most shapes ; Designed to deliver a consistent finish with a uni...

Made of the highest industrial quality abrasive cloth and have an optimal number of flaps that are securely bonded and balanced around the hub for...

Metal fabrication Blending welds Deburring Cleaning and finishing; Conformable to most shapes ; Designed to deliver a consistent finish with a uni...

Metal fabrication Blending welds Deburring Cleaning and finishing; Conformable to most shapes ; Designed to deliver a consistent finish with a uni...

Metal fabrication Blending welds Deburring Cleaning and finishing; Conformable to most shapes ; Designed to deliver a consistent finish with a uni...

Metal fabrication Blending welds Deburring Cleaning and finishing; Conformable to most shapes ; Designed to deliver a consistent finish with a uni...

Metal fabrication Blending welds Deburring Cleaning and finishing; Conformable to most shapes ; Designed to deliver a consistent finish with a uni...

Metal fabrication Blending welds Deburring Cleaning and finishing; Conformable to most shapes ; Designed to deliver a consistent finish with a uni...

1" Flare nozzle Pack of 2 1/4" SYSTEM - 1/4" INSIDE DIAMETER (CONT'D) Loc-Line®'s unique ball and socket design is fully hand adjustable in both p...

Pack of 2 1/2" SYSTEM - 1/2" INSIDE DIAMETER 2 1/2" Flare nozzle Pack of 2 Loc-Line®'s unique ball and socket design is fully hand adjustable in b...

Pail Powdered, alkaline, multi-compound powder designed to solve the toughest cleaning problems on concrete floors Fast-acting alkalis, wetting an...

Material: Nylon Colour: Black No. of Pockets: 1 Style: Flashlight Holder Manufacturer Part Number: 68905 For Use With: 3AA ProPolymer® Haz-Lo...

Material: Nylon Colour: Black No. of Pockets: 1 Style: Flashlight Holder Manufacturer Part Number: 85905 For Use With: TL-2®, Night Com®, Twi...

Pack of 4 1/4" Flat 5 hole nozzle Pack of 4 • 0.060 Slot height 1/4" SYSTEM - 1/4" INSIDE DIAMETER (CONT'D) Loc-Line®'s unique ball and socket des...

Brush Width: 1/4" Handle Material: Wood Filament Material: Synthetic

Brush Width: 1/2" Brush Material: Synthetic Handle Material: Wood

Seamless silver ferrule Extra-fine brown synthetic hair with dark tips Red transparent lacquer coating allows the wooden structure to be seen thro...

Regular square section, tapers off in both width and thickness toward the point Applications: General purpose, used for smoothing surfaces and rap...