We ship Canada-wide
Filters
- Aluminum File (0)
- Ball Pein Hammer (0)
- Band File (0)
- Brick Hammer (0)
- Carpenter Claw Hammer (0)
- Chain Saw File (1)
- Chipping Hammer (0)
- Chisel Set (1)
- Club Hammer (0)
- Cold Chisel (0)
- Cordless Hammer Driver (0)
- Cordless Rotary Hammer (0)
- Cordless Screwdriver (0)
- Crimping Pliers (0)
- Cross Point Screwdriver (0)
- Dead Blow Hammer (0)
- Demolition Claw Hammer (0)
- Desktop File/Tray (0)
- Diagonal Cutting Pliers (0)
- End Cutting Pliers (0)
- Farmer's File (0)
- Fence Pliers (0)
- File Card With Brush (0)
- File Cart (0)
- File Folders (0)
- File Handle (0)
- File Set (0)
- File Storage Drawer (0)
- Flat File (4)
- Groove Joint Pliers (0)
- Half Round File (5)
- Hammer Drill (0)
- Hammer Handle (0)
- Hammer Set (0)
- Hammer Stapler (0)
- Hammer Tip (0)
- Hand File (3)
- Handy File (0)
- Hex Point Screwdriver (0)
- Insulated Pliers (0)
- Insulated Screwdriver (0)
- Jeweller's Screwdriver (0)
- Lathe File (0)
- Linesman Pliers (0)
- Locking Pliers (0)
- Long Nose Pliers (0)
- Low Profile Pallet Truck (0)
- Low Profile Shop Cart (0)
- Masonry Chisel (0)
- Mill File (2)
- Multi Purpose Pliers (0)
- Multibit Screwdriver (0)
- Needle Nose Pliers (0)
- Nutsetter & Screwdriver Bit Sets (0)
- Phillips Screwdrivers (0)
- Plan File Parts & Accessories (0)
- Plan File Storage (0)
- Plier Ground Clamp (0)
- Plier Parts & Accessories (0)
- Plier Set (0)
- Plier Stapler (0)
- Pneumatic Band File (0)
- Pneumatic Screwdriver (0)
- Pneumatic Utility Hammer (0)
- Power Chisel (0)
- Punch & Chisel Set (0)
- Roll File Storage (0)
- Round File (6)
- Scaling Chisel (0)
- Screwdriver Insert Bit (0)
- Screwdriver Power Bit (0)
- Screwdriver Set (0)
- SDS-Plus Rotary Hammer (0)
- Seaming Pliers (0)
- Side Cut Rebar Pliers (0)
- Sledge Hammer (0)
- Slip Joint Pliers (0)
- Slot Cabinet Tip Screwdrivers (0)
- Slot Keystone Screwdrivers (0)
- Soft Face Hammer (0)
- Specialty Pliers (0)
- Specialty Screwdriver (0)
- Square Drive Screwdriver (0)
- Square File (3)
- Tamper Proof Screwdriver (0)
- Taper File (4)
- Thread Restoring File (0)
- Three Square File (1)
- Torque Screwdriver (0)
- Torx® Screwdriver (0)
- Wall File Holder (0)
- Warding File (2)
- Wedge For Hammer Handle (0)
- Welding Pliers (0)
- Wire Stripping Pliers (0)
- Woodworking Hand Chisel (0)
- Woodworking Lathe Chisel (0)
- Apex (0)
- APEX (0)
- ARROW (0)
- Arrow (0)
- Aurora Tools (3)
- AURORA TOOLS (2)
- Bondhus (0)
- Brady (0)
- CHANNELOCK (0)
- Channelock (0)
- CHICAGO PNEUMATIC (0)
- Chicago Pneumatic (0)
- CIMCO (0)
- Cimco (0)
- Crescent (0)
- CRESCENT (0)
- Dewalt (0)
- DEWALT (0)
- DYNABRADE (0)
- Dynabrade (0)
- DYNAMIC (0)
- Dynamic Tools (0)
- DYNAMIC TOOLS (0)
- ESSELTE (0)
- FELLOWES (0)
- Garant (0)
- GARANT (0)
- Gearwrench (0)
- GEARWRENCH (0)
- General Tools (0)
- GENERAL TOOLS (0)
- GERBER (0)
- Gerber (0)
- Grip-On (0)
- GRIP-ON (0)
- Ingersoll Rand (0)
- INGERSOLL RAND (0)
- IRWIN (0)
- Irwin (0)
- ITC (0)
- JET (1)
- JET EQUIPMENT (6)
- KING CANADA (0)
- Klein Tools (0)
- KLEIN TOOLS (0)
- Kleton (0)
- Lenco (0)
- Lift-Rite (0)
- LIND EQUIPMENT (0)
- Lind Equipment (0)
- MAKITA (0)
- Makita (0)
- Megapro (0)
- MILWAUKEE (0)
- Milwaukee (0)
- Nicholson By Crescent (4)
- NICHOLSON BY CRESCENT (16)
- OETIKER INC (0)
- Osborn (0)
- Paulin (0)
- PICQUIC (0)
- Picquic (0)
- Safco (0)
- SAFCO (0)
- shopSafety (0)
- SHUR-FAST (0)
- STANLEY BOSTITCH (0)
- Stanley Bostitch (0)
- STANLEY TOOLS (0)
- Stanley Tools (0)
- STOREX (0)
- The Harris Products Group (0)
- UTICA (0)
- Weld-Mate (0)
- Wera Tools (0)
- WERA TOOLS (0)
- Wilton (0)
- Wiss By Crescent (0)
- WOOD-MILLER (0)
- Wood-Miller (0)
- 1-1/2" (1)
- 1-7/8" (2)
- 3-5/8" (1)
- 3.5" (1)
- 4" (9)
- 4-1/8" (1)
- 4.25" (1)
- 5" (4)
- 5-1/2" (2)
- 6" (32)
- 6-1/2" (3)
- 6.25" (1)
- 6.5" (1)
- 7" (2)
- 7-1/2" (1)
- 8" (34)
- 8.4" (1)
- 10" (27)
- 12" (21)
- 14" (11)
- 15.5" (1)
- 16" (2)
- 25.75" (1)
- 36" (1)
- 70 mm (1)
- 10 3/4" (273 mm) (1)
- 14 1/4" (362 mm) (1)
- 14 3/5" (371 mm) (1)
- 19" (445 mm) (1)
- 216-312 in-lbs. (1)
4-in-1 Rasp & File Combination
Aurora ToolsA multi-use tool used for many different tasks Designed with both round and flat surfaces File and rasp in one tool Shape: Half Round Length: 6"...
View full detailsMill File
Aurora ToolsMill Files are commonly used for sharpening a wide range of saws and knives Can also be used for finishing surfaces and general shop use Suitable...
View full detailsFile
Aurora ToolsCan also be referred to as “medium cut" files Can be used for light material removal Second cut files can also be used to finish smoother surface...
View full detailsSlim Taper File
AURORA TOOLSTriangular shape makes accessing hard to reach locations and squaring corners easier Ideal for filing and sharpening gullets between saw teeth Si...
View full detailsThree Square File
JET EQUIPMENTTriangular section 60° angles between three sides Applications: For filing internal angles or cleaning out corners inaccessible to flat files, als...
View full detailsSmooth Cut Round File
JET EQUIPMENTRound section, Tapers toward the point Applications: Designed to file or enlarge holes, circular openings or rounded grooves too small for half ro...
View full detailsBastard Cut Round File
JET EQUIPMENTRound section, Tapers toward the point Applications: Designed to file or enlarge holes, circular openings or rounded grooves too small for half ro...
View full detailsFile
JET EQUIPMENTHalf round style is flat on one side and curved on the other Applications: Used for filing both flat and concave surfaces, rounding out holes as w...
View full detailsFile
JET EQUIPMENTHalf round style is flat on one side and curved on the other Applications: Used for filing both flat and concave surfaces, rounding out holes as w...
View full detailsBastard Cut Flat File
JETRegular square section, tapers off in both width and thickness toward the point Applications: General purpose, used for smoothing surfaces and rap...
View full detailsWarding Files
NICHOLSON BY CRESCENTUsed primarily by locksmiths in repairing and filing ward notches in keys Thin rectangular shape Double-cut on sides, single-cut on edges Also sui...
View full detailsWarding Files
NICHOLSON BY CRESCENTUsed primarily by locksmiths in repairing and filing ward notches in keys Thin rectangular shape Double-cut on sides, single-cut on edges Also sui...
View full detailsSquare Files
NICHOLSON BY CRESCENTUsed on slots, keyways and general surface filing Square shape Double-cut Tapered slightly towards point Larger sizes frequently preferred to corr...
View full detailsSquare Files
NICHOLSON BY CRESCENTUsed on slots, keyways and general surface filing Square shape Double-cut Tapered slightly towards point Larger sizes frequently preferred to corr...
View full detailsMill Files
Nicholson By CrescentUsed for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...
View full detailsTaper Files - Extra Slim
NICHOLSON BY CRESCENTTriangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 6" Manufacturer Part Number: 14665MN
Taper Files - Slim
NICHOLSON BY CRESCENTTriangular shape Edges set and cut for filing gullets between saw teeth Shape: Triangle Length: 6" Manufacturer Part Number: 14224MN
Taper Files - Regular
NICHOLSON BY CRESCENTTriangular shape Edges set and cut for filing gullets between saw teeth Tapers slightly towards the point Shape: Triangle Length: 6" Manufacture...
View full detailsChain Saw Files - Round Smooth
Nicholson By CrescentRound shape Smooth cut 6" files have a straight tang Packaging is recycable Shape: Round Length: 6" Cut Type: Knurl Manufacturer Part Number: T...
View full detailsThree Square Files
NICHOLSON BY CRESCENTFor general use by machinists for filing internal angles more acute than right angles, clearing out square corners and filing taps and gutters Tri...
View full detailsRound Files
NICHOLSON BY CRESCENTPrimarily used to file circular openings or concave surfaces Round shape All 4, 5, 6, 8, 10, 12" files are single-cut 14" bastard file is double-c...
View full detailsRound Files
NICHOLSON BY CRESCENTPrimarily used to file circular openings or concave surfaces Round shape All 4, 5, 6, 8, 10, 12" files are single-cut 14" bastard file is double-c...
View full detailsRound Files
NICHOLSON BY CRESCENTPrimarily used to file circular openings or concave surfaces Round shape All 4, 5, 6, 8, 10, 12" files are single-cut 14" bastard file is double-c...
View full detailsHand Files
Nicholson By CrescentRectangular shape Double-cut 1 safe edge Same coarseness as flat files of corresponding lengths Packaging is recycable Shape: Flat Length: 6" C...
View full detailsHand Files
Nicholson By CrescentRectangular shape Double-cut 1 safe edge Same coarseness as flat files of corresponding lengths Packaging is recycable Shape: Flat Length: 6" C...
View full detailsHalf Round Files
NICHOLSON BY CRESCENTHalf Round, 6", Type: Smooth| Used on concave, convex and flat surfaces Rounded on 1 side, flat on opposite Backs of all half-round bastard files a...
View full detailsHalf Round Files
NICHOLSON BY CRESCENTHalf Round, 6", Type: Second| Used on concave, convex and flat surfaces Rounded on 1 side, flat on opposite Backs of all half-round bastard files a...
View full detailsHalf Round Files
NICHOLSON BY CRESCENTHalf Round, 6", Type: Bastard| Used on concave, convex and flat surfaces Rounded on 1 side, flat on opposite Backs of all half-round bastard files ...
View full detailsFlat Files
NICHOLSON BY CRESCENTUsed by machinists, machinery builders, ship and engine builders, repairman and others who require rapid removal of metal Rectangular in cross sec...
View full detailsFlat Files
NICHOLSON BY CRESCENTUsed by machinists, machinery builders, ship and engine builders, repairman and others who require rapid removal of metal Rectangular in cross sec...
View full detailsSmooth Cut Flat File
JET EQUIPMENTRegular square section, tapers off in both width and thickness toward the point Applications: General purpose, used for smoothing surfaces and rap...
View full detailsCentre Punches
AURORA TOOLSSingle piece construction with hexagonal shank increases durability Manufactured from high quality carbon steel Accurately hardened for increased ...
View full details