We ship Canada-wide
Filters
- Aluminum File (1)
- Ball Pein Hammer (0)
- Band File (0)
- Brick Hammer (0)
- Carpenter Claw Hammer (0)
- Chain Saw File (0)
- Chipping Hammer (0)
- Chisel Set (0)
- Club Hammer (0)
- Cold Chisel (0)
- Cordless Hammer Driver (0)
- Cordless Rotary Hammer (0)
- Cordless Screwdriver (0)
- Crimping Pliers (0)
- Cross Point Screwdriver (0)
- Dead Blow Hammer (0)
- Demolition Claw Hammer (0)
- Desktop File/Tray (0)
- Diagonal Cutting Pliers (0)
- End Cutting Pliers (0)
- Farmer's File (0)
- Fence Pliers (0)
- File Card With Brush (3)
- File Cart (0)
- File Folders (0)
- File Handle (0)
- File Set (0)
- File Storage Drawer (0)
- Flat File (6)
- Groove Joint Pliers (0)
- Half Round File (6)
- Hammer Drill (0)
- Hammer Handle (0)
- Hammer Set (0)
- Hammer Stapler (0)
- Hammer Tip (0)
- Hand File (2)
- Handy File (0)
- Hex Point Screwdriver (0)
- Insulated Pliers (0)
- Insulated Screwdriver (0)
- Jeweller's Screwdriver (0)
- Lathe File (1)
- Linesman Pliers (0)
- Locking Pliers (0)
- Long Nose Pliers (0)
- Low Profile Pallet Truck (0)
- Low Profile Shop Cart (0)
- Masonry Chisel (0)
- Mill File (3)
- Multi Purpose Pliers (0)
- Multibit Screwdriver (0)
- Needle Nose Pliers (0)
- Nutsetter & Screwdriver Bit Sets (0)
- Phillips Screwdrivers (0)
- Plan File Parts & Accessories (0)
- Plan File Storage (0)
- Plier Ground Clamp (0)
- Plier Parts & Accessories (0)
- Plier Set (0)
- Plier Stapler (0)
- Pneumatic Band File (0)
- Pneumatic Screwdriver (0)
- Pneumatic Utility Hammer (0)
- Power Chisel (0)
- Punch & Chisel Set (0)
- Roll File Storage (0)
- Round File (4)
- Scaling Chisel (0)
- Screwdriver Insert Bit (0)
- Screwdriver Power Bit (0)
- Screwdriver Set (0)
- SDS-Plus Rotary Hammer (0)
- Seaming Pliers (0)
- Side Cut Rebar Pliers (0)
- Sledge Hammer (0)
- Slip Joint Pliers (0)
- Slot Cabinet Tip Screwdrivers (0)
- Slot Keystone Screwdrivers (0)
- Soft Face Hammer (0)
- Specialty Pliers (0)
- Specialty Screwdriver (0)
- Square Drive Screwdriver (0)
- Square File (1)
- Tamper Proof Screwdriver (0)
- Taper File (0)
- Thread Restoring File (0)
- Three Square File (0)
- Torque Screwdriver (0)
- Torx® Screwdriver (0)
- Wall File Holder (0)
- Warding File (0)
- Wedge For Hammer Handle (0)
- Welding Pliers (0)
- Wire Stripping Pliers (0)
- Woodworking Hand Chisel (0)
- Woodworking Lathe Chisel (0)
- Apex (0)
- APEX (0)
- ARROW (0)
- Arrow (0)
- Aurora Tools (2)
- AURORA TOOLS (0)
- Bondhus (0)
- Brady (0)
- CHANNELOCK (0)
- Channelock (0)
- CHICAGO PNEUMATIC (0)
- Chicago Pneumatic (0)
- CIMCO (0)
- Cimco (0)
- Crescent (0)
- CRESCENT (0)
- Dewalt (0)
- DEWALT (0)
- DYNABRADE (0)
- Dynabrade (0)
- DYNAMIC (1)
- Dynamic Tools (1)
- DYNAMIC TOOLS (1)
- ESSELTE (0)
- FELLOWES (0)
- Garant (0)
- GARANT (0)
- Gearwrench (0)
- GEARWRENCH (0)
- General Tools (0)
- GENERAL TOOLS (0)
- GERBER (0)
- Gerber (0)
- Grip-On (0)
- GRIP-ON (0)
- Ingersoll Rand (0)
- INGERSOLL RAND (0)
- IRWIN (0)
- Irwin (0)
- ITC (0)
- JET (0)
- JET EQUIPMENT (2)
- KING CANADA (0)
- Klein Tools (0)
- KLEIN TOOLS (0)
- Kleton (0)
- Lenco (0)
- Lift-Rite (0)
- LIND EQUIPMENT (0)
- Lind Equipment (0)
- MAKITA (0)
- Makita (0)
- Megapro (0)
- MILWAUKEE (0)
- Milwaukee (0)
- Nicholson By Crescent (7)
- NICHOLSON BY CRESCENT (13)
- OETIKER INC (0)
- Osborn (0)
- Paulin (0)
- PICQUIC (0)
- Picquic (0)
- Safco (0)
- SAFCO (0)
- shopSafety (0)
- SHUR-FAST (0)
- STANLEY BOSTITCH (0)
- Stanley Bostitch (0)
- STANLEY TOOLS (0)
- Stanley Tools (0)
- STOREX (0)
- The Harris Products Group (0)
- UTICA (0)
- Weld-Mate (0)
- Wera Tools (0)
- WERA TOOLS (0)
- Wilton (0)
- Wiss By Crescent (0)
- WOOD-MILLER (0)
- Wood-Miller (0)
- 1-1/2" (1)
- 1-7/8" (2)
- 3-5/8" (1)
- 3.5" (1)
- 4" (9)
- 4-1/8" (1)
- 4.25" (1)
- 5" (4)
- 5-1/2" (2)
- 6" (32)
- 6-1/2" (3)
- 6.25" (1)
- 6.5" (1)
- 7" (2)
- 7-1/2" (1)
- 8" (34)
- 8.4" (1)
- 10" (27)
- 12" (21)
- 14" (11)
- 15.5" (1)
- 16" (2)
- 25.75" (1)
- 36" (1)
- 70 mm (1)
- 10 3/4" (273 mm) (1)
- 14 1/4" (362 mm) (1)
- 14 3/5" (371 mm) (1)
- 19" (445 mm) (1)
- 216-312 in-lbs. (1)
File
Aurora ToolsDouble cut flat bastard metal file used for aggressive stock removal Ideal for machinist and general shop use Tapered tip to allow for more detai...
View full detailsFile
Aurora ToolsHalf-Round Bastard Files are commonly used rounding out holes Versatile on concave, convex and or flat surfaces Suitable for on Stainless Steel, ...
View full detailsFile
JET EQUIPMENTHalf round style is flat on one side and curved on the other Applications: Used for filing both flat and concave surfaces, rounding out holes as w...
View full detailsFlat Bastard File
JET EQUIPMENTRegular square section, tapers off in both width and thickness toward the point Applications: General purpose, used for smoothing surfaces and rap...
View full detailsFile Card
NICHOLSON BY CRESCENTFor general cleaning of file teeth, removing fillings, dirt, rust, burrs, corrosion, and most buildups of foreign material on metal Length: 10" ...
View full detailsLong Angle Lathe Files - Fine
Nicholson By CrescentSpecially designed for finishing rapid stock removal on lathe work Rectangular shape Safe edges Cut faster than regular mill files and leave smoot...
View full detailsAluminum Files - Type "A" Flat
Nicholson By CrescentSpecial tooth construction eliminates clogging when filing aluminum Flat shape Double-cut All sizes have same number of teeth per inch Smooth fini...
View full detailsSquare Files
NICHOLSON BY CRESCENTUsed on slots, keyways and general surface filing Square shape Double-cut Tapered slightly towards point Larger sizes frequently preferred to corr...
View full detailsMill Files
Nicholson By CrescentUsed for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...
View full detailsMill Files
Nicholson By CrescentUsed for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...
View full detailsMill Files
Nicholson By CrescentUsed for sharpening mill or circular saws Also for draw-filing and finishing metals Rectangular shape Single-cut on sides and edges 2 square edges...
View full detailsFile Cleaners
NICHOLSON BY CRESCENTFile Card and Brush Available in two styles - file card for general cleaning of file teeth and file card/brush especially for use on finer cut fil...
View full detailsFile Cleaners
NICHOLSON BY CRESCENTFile Card Available in two styles - file card for general cleaning of file teeth and file card/brush especially for use on finer cut files Length...
View full detailsRound Files
NICHOLSON BY CRESCENTPrimarily used to file circular openings or concave surfaces Round shape All 4, 5, 6, 8, 10, 12" files are single-cut 14" bastard file is double-c...
View full detailsRound Files
NICHOLSON BY CRESCENTPrimarily used to file circular openings or concave surfaces Round shape All 4, 5, 6, 8, 10, 12" files are single-cut 14" bastard file is double-c...
View full detailsRound Files
NICHOLSON BY CRESCENTPrimarily used to file circular openings or concave surfaces Round shape All 4, 5, 6, 8, 10, 12" files are single-cut 14" bastard file is double-c...
View full detailsHand Files
Nicholson By CrescentRectangular shape Double-cut 1 safe edge Same coarseness as flat files of corresponding lengths Packaging is recycable Shape: Flat Length: 10" ...
View full detailsHalf Round Files
NICHOLSON BY CRESCENTHalf Round, 10", Type: Smooth| Used on concave, convex and flat surfaces Rounded on 1 side, flat on opposite Backs of all half-round bastard files ...
View full detailsHalf Round Files
NICHOLSON BY CRESCENTHalf Round, 10", Type: Second| Used on concave, convex and flat surfaces Rounded on 1 side, flat on opposite Backs of all half-round bastard files ...
View full detailsHalf Round Files
NICHOLSON BY CRESCENTHalf Round, 10", Type: Bastard| Used on concave, convex and flat surfaces Rounded on 1 side, flat on opposite Backs of all half-round bastard files...
View full detailsMagicut® Files - Flat
Nicholson By CrescentUsed by machinists as all-purpose file to remove stock rapidly and to leave a smooth finish Tapered point in width File features a pattern of narr...
View full detailsFlat Files
NICHOLSON BY CRESCENTUsed by machinists, machinery builders, ship and engine builders, repairman and others who require rapid removal of metal Rectangular in cross sec...
View full detailsFlat Files
NICHOLSON BY CRESCENTUsed by machinists, machinery builders, ship and engine builders, repairman and others who require rapid removal of metal Rectangular in cross sec...
View full detailsFlat Files
NICHOLSON BY CRESCENTUsed by machinists, machinery builders, ship and engine builders, repairman and others who require rapid removal of metal Rectangular in cross sec...
View full detailsRound File
DYNAMICIdeal for sharpening round openings or concave surfaces Includes large comfort grip handle Precision-machined cutting edges Hardened and tempered ...
View full detailsMill File
Dynamic ToolsIdeal for sharpening mill or circular saws Includes large comfort grip handle Precision-machined cutting edges Hardened and tempered construction ...
View full detailsHalf-Round File
DYNAMIC TOOLSHalf Round, 10", Type: Bastard| Ideal for concave, convex or flat surfaces Includes large comfort grip handle Precision-machined cutting edges Hard...
View full details